Jump to content
SAU Community

Recommended Posts

Hi guys considering doing the smart thing and bailing on my build considering things have changed in my life

I will only be parting once I get the big items pre sold shell engine box

R34 gtt Stat write off can't be rego'd shell had a front end smack pulled straight rad support not mint needs a bonnet, sus and wheels to roll $3,000 ono

(not interested in your thoughts as I've spent a fair bit to get it looking ok again)

25 neo engine no ecu or injectors $1500 proven running motor not some wrecking yard unknow can be comp tested by buyer if needed

34 25 5 speed box $1500 firm

ORC pull type twin plate clutch $750 firm

HPI R34 Alloy Rad $280 firm

Blitz return flow intercooler brand new in the box $500 firm

r34 gtt fcon ecu and patch loom tuned for cooler and exhaust round 220rwkw atm (info from prev owner) $400 ono

cat back exhaust unknown brand $500 ono

Chinese r33 front pipe brand new $80

Chinese r33/4 dump pipe brand new $50

Kando brand new external gate T67 $850 firm

Kando rb bolt on TD06H 20g internal gate brand new in the box $750

K sport R34 gtt coilovers $600 firm

r34 gtt nistune $500

Turbosmart 45mm gate brand new in the box bought from mtq so legit $385 firm

walbro E85 450l pump brand new $150 bought from mtq again

ev11 or whatever 25 neo 1000cc injectors fitted but not fired again brand new from mtq $550 firm

feel free to mesg me if you have questions

if I don't get what I'm after I'll just put it on the back burner

041

1152

733

post-15018-0-57121300-1400155374_thumb.jpg

post-15018-0-75833500-1400155380_thumb.jpg

post-15018-0-71842100-1400155387_thumb.jpg

post-15018-0-85234800-1400155403_thumb.jpg

post-15018-0-97336900-1400155449_thumb.jpg

post-15018-0-28715100-1400155473_thumb.jpg

post-15018-0-94930300-1400155541_thumb.jpg

post-15018-0-64804600-1400155550_thumb.jpg

post-15018-0-50591600-1400155560_thumb.jpg

post-15018-0-89749200-1400155589_thumb.jpg

Edited by 1400r

If you don't mind me posting up Ryan I've got the triple gauges for the other member.

Also have a mint front section that was cut off my car and ready to go on this if anyone wants to fix the rad support etc properly.

  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I think he was only proposing to use the wire, not the sender. Simply because it runs from the right place to the right place. Personally, I wouldn't hack up the factory wiring like that. I'd just lay in the Defi loom.
    • From memory it wasn't too hard to simply see which wire ran where when you plug that in. Unfortunately also from memory the OEM sender does not use the same configuration 99.9% of gauges run. So in other words if you connect the signal wire that was running to the OEM gauge to your DEFI gauge you might find your oil reads at 200C or some other incorrect value. I remember having the same line of thought and then running new wires/senders to match the gauges I have. The pinout is available in the R34 workshop manual.
    • Does anyone on here know which wire on the GTT triple gauge pod harness is for the oil temp gauge? my sensor works fine but I upgraded the gauges to DEFI advance. And if I can simply piggyback off the oem oil temp wire to the Defi oil temp sensor wire that would make life so much easier. 
    • Even face her a wash now that’s it worth more than my house
    • This was what I was invisioning, or Pete cutting a beer can up and hose clamping it around the catch can! Ha ha ha
×
×
  • Create New...