Jump to content
SAU Community

Wtb R34 Cold Air Intake

eswed69

By eswed69,
in Engines & Forced Induction

 Share

Recommended Posts

fyjosh Enthusiast

fyjosh

Posted
Posted

dont remove the stock intake, ie the big chamber that sits between the throttlebody and the flexible tube (before the AFM).

removing it will rob you of precious torque/power, and trust me you have SFA to lose.

you will gain annoying noise, humming sound, and lose power... get a pod adapter and keep everything else stock.

replace all your vac hoses while you're at it.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I can make any piping you need if the car is here, but no location makes it hard to help.

I have seen 500kw through a panel filter, and the stock airbox is already a cold air induction. The only thing you will gain is intake noise as above.

  • 3 weeks later...
eswed69 Apprentice

eswed69

Posted
  • Author
Posted

Well there's a pod on mine with an airflow meter 3 inches and pod is sitting right next to the engine (I brought the car this way) I got a custom made one 3 inch to suit the airflow meter rather then stock 2.5 it made a power increase only due to the fact the old set up was entirely wrong but I'm trying to hunt down a stock airbox

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • GTSBoy
      R32 GTS (RB20DE) Injectors Replacement

      By GTSBoy · Posted

      No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • codygrimm27
      Can you mount the ATTESA pump in other locations?

      By codygrimm27 · Posted

      Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...