Jump to content
SAU Community

Need Help Please Rb25 Issues

Rb25detvlt
 Share

Recommended Posts

Rb25detvlt Collaborator

Rb25detvlt

Posted
Posted

Hi all I Hav a few problems with my car no wanting to run. I'll give u the basic run down I Hav a Rb25neo in a vl Commodore I'm using all the R33 series 1 accessorys recently I went to install a power fc jetro an had issues with it not powering up but running fine on the standard R33 ecu the issue ended up being the previous owner hacked up the old loom an bypassed the eccs an ignition relay on the loom. Now I have changed engine loom to a new one with all relay's intact the power fc an the standard ecu both power up fine now I'm getting plenty of spark my full pump is working an my injectors are working fine put the car will not fire up. I've changed the cas wiring accordingly to suit the neo cas the pinout is now 1 an 4 are swapped over an 2 an 3 are swapped I take the cas off an spin it an the injectors are clicking an the coils are sparking but the car will still not fire up. Any help or advice would be greatly appreciated thanks

Link to comment
https://www.sau.com.au/forums/topic/444150-need-help-please-rb25-issues/
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

Hi all I Hav a few problems with my car no wanting to run. I'll give u the basic run down I Hav a Rb25neo in a vl Commodore I'm using all the R33 series 1 accessorys recently I went to install a power fc jetro an had issues with it not powering up but running fine on the standard R33 ecu the issue ended up being the previous owner hacked up the old loom an bypassed the eccs an ignition relay on the loom. Now I have changed engine loom to a new one with all relay's intact the power fc an the standard ecu both power up fine now I'm getting plenty of spark my full pump is working an my injectors are working fine put the car will not fire up. I've changed the cas wiring accordingly to suit the neo cas the pinout is now 1 an 4 are swapped over an 2 an 3 are swapped I take the cas off an spin it an the injectors are clicking an the coils are sparking but the car will still not fire up. Any help or advice would be greatly appreciated thanks

What.

I'm sure that I have read this badly written post before.

You are asking people to go out of their way to help you.

The least you can do is write an easily read, sensibly formatted post as a sign of respect.

Anyway, can't answer based on the info you have given.

Specs are required.

I'm sure some people can make some wild guesses for you.

Here's mine.

Injectors too big for tune in ecu.

Rb25detvlt Collaborator

Rb25detvlt

Posted
  • Author
Posted

Sorry I Thort the post was written correctly an the issue in the previous post was fixed with a new loom. As for the injectors I put the standard injectors back in it and it is still doin the same thing on the power fc an the standard ecu. I've spent the last 3 hours double an triple checking everything... and thanks Ben c34 for the links you gave me in my previous post

Rb25detvlt Collaborator

Rb25detvlt

Posted
  • Author
Posted

Yes I put the 850 denso's in it as the car is goin one E85 shortly but than it wouldn't start on them so I put the standard ones back in it an tried the standard ecu an it still wouldn't fire. One thing I did notice was the eccs relay is clicking when the ignition is turned on but the ignition relay on the loom is not clicking at all but somehow it is still getting spark...

Rb25detvlt Collaborator

Rb25detvlt

Posted
  • Author
Posted

Ok so I put new plugs in it an it started up an runs fine on the standard ecu. Now wan I plug the power fc in it trys to start but only seems like it's running on 2 cylinders, does anyone Hav an idear at what would be causing it to do this

Rb25detvlt Collaborator

Rb25detvlt

Posted
  • Author
Posted

The power fc itself is only meant to Hav a tune for 12 pound boost and standard injectors I Hav not messed or tried to play around with the setting I just need to get it running correctly to get it tuned. An the tuner is less than a km away from my my house. The tuner already told me that the power fc should Start an run the car with out a issue. Is there anything different that should be dun because the power fc is a jetro model the map sensor is all hooked up correctly

Rb25detvlt Collaborator

Rb25detvlt

Posted
  • Author
Posted

It's not a brand new computer the previous owner had the tune dun on it. I just spoke to the guy I got the fc off an he said wan it was tuned it had the afm an map sensor hooked up is the correct ? An thanks for the replays bak so far sorry if I sound like a bit of a idiot asking all these questions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...