Jump to content
SAU Community

Recommended Posts

My RB20 is pretty well stock apart from a little bit of boost and a 3 inch turbo back exhaust and it surprised me what I could keep up with.

I'll push Pinky harder next time... :P

I think that the R32s being lighter in comparison to R33's is rather noticeable on track.....

Add a few light mods and you guys were fanging around the track IMO

pretty much,definitely helps out when up against insanely powerful cars,luckily mines pretty well set up in the suspension so can out corner alot of other cars,but my tyres had lost most of there grip near the end of the 53 minute happy laps.Could feel them crying underneath me,but my brakes handled the torture really well,but i did notice a light vibration under hard braking near the end,may need to look at the rotors and pads soon.

I think that the R32s being lighter in comparison to R33's is rather noticeable on track.....

Add a few light mods and you guys were fanging around the track IMO

They're only about 75kg lighter...

well add your 30kg of doof doof Mike and you have a 105kg disadvantage right there

When we had our last suspension tech night we had our cars weighed, mine was about 75kg heavier than Pete's old 32 GTST. That was with mine totally full of fuel and all my audio gear in it ;)

LOL "The sprint tracks way to f**king small for this, way to f**king small" I think everyone echoed those thoughts.

Yeah, glad they set up the clubman. The national would have been even better.

That's weird Mike.

The kerb weight of an R32 GTST is 1,280kg and R33 GTST is 1,390kg

You been shifty and stripped shit outa the SS

On my rego it says mine is 1340kg and also has stereo stuff in it and a full size spare

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...