Jump to content
SAU Community

Recommended Posts

do some decent porting of the head and it will make it easier. We had a T78 on an RB26 and depending on the dyno it made either 460rwkw or 400rwkw lol

All we cared about was that it ran 130mph+ on 98 pump fuel so the dyno figures didnt really matter. It now makes 485rwkw on E85 and time will tell what mph and et it runs now

Large framed turbo and good street response is what everyone wants but physics gets in the way.

If it isn't in that thread then it's probably not going to happen the way you want it.

Is it a silly question to ask why you need that power specific power level?

Basically the power level is to achieve guarantee high 9 sec pass at calder

Previously had a single cammed rb30 go 10.8 at 126 mph at calder on pump fuel with jatco 3 speed with 3500 convertor and 3.7 in rear

Now have gone twin cam 26 headed rb30 so basically seeing what works for people

Not looking to break any records just want good honest power and not a dyno queen

Checked out that 400kw link but doesn't really get into pump 98 combos,everybody has jumped on e85 band wagon.

So please guys after some 98 premium combos

Looking towards gt4294r to deliver the power and good street response

There are good reasons for jumping on that bandwagon, petrol is crap.

Good luck...

420rwkw on E85, 25psi, in a 1400 kilo car that ran 137mph with a GReddy T78. Used to have very very usable power by 4000rpm

Now making 485rwkw on E85 at 25psi with a Precision 6766 and 1.0 rear. Will tell you Sunday what it runs ;)

Seriously forget the 42 and look into a Precision, Much smaller, much better response and still massive power considering the size of them. They are tiny in comparison.

  • Like 1

Seriously forget the 42 and look into a Precision, Much smaller, much better response and still massive power considering the size of them. They are tiny in

The 42 is a good turbo, it will run well over 550kw, as should your Precision...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...