Jump to content
SAU Community

Recommended Posts

Hi

I'm getting a bigger turbo for my gtt and I'm wondering if I need to get an aftermarket ecu and a tune or an apexi afc to controll the air:fuel ratio. Does anyone know what's better for a car ? Also nistune or power fc for an auto? I know there's a lot of threads but they all have different answers.

Any help would be greatly appreciated

If the car is an auto I dont think the power fc will work If I can remember correctly. I think your best bet would be nistune and there running r35 afm now with good results. The afc gives control of adjusting the afr's but your hands are tied when it comes to tuning the ignition curve. The last and best option but way more costly is somthing like a motec or haltech ecu. Where the options are endless.

Yeah, what MJTru said.

Essentially, for a stock turbo the AFC can yield acceptable results but if you are going for a bigger turbo (which means to really do the job right you also are going to change the AFM and injectors- and fuel pump if that isn't already done) then a nistune will probably be your best option for an auto. Perhaps even consider a Toshi tune (search for this).

Edited by jjman

You can run an AFC or nistune with the auto. The others won't pull timing on gear changes and will destroy your transmission pretty quickly from what I've heard.

AFC's are no good, even with a stock turbo there isn't much point of running a piggyback like that. I'm sure there was a time when it was a good idea but not anymore I guess.

nistune it is.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...