Jump to content
SAU Community

Removing Front Seats From M35 Axis To Change Seat Button Modules

ECR33_RB25DET
 Share

Recommended Posts

ECR33_RB25DET Community Regular

ECR33_RB25DET

Posted
Posted

Hi fellow Stag owners,

Maybe this has been covered, I'm sure it has somewhere, I couldn't find the detailed thread hence posting this one.

Sorry if it's a repeat.

I need to remove the front Axis seats to replace the seat adjusting modules.

How do I remove the plastic trim located on the rear of each seat rail, they sit on the carpet and clip into the rear of the seat rails in a very weird ar$e way that makes them a ball breaker to remove. I can take a chisel and hammer to them but for the original cosmetic I'd like to remove and refit.

ECR33_RB25DET Community Regular

ECR33_RB25DET

Posted
  • Author
Posted (edited)

They just slide backwards mate. :)

Definitely tried this Scott. The plastic trims that are fixed to the rear of the seat rails don't appear to simply slide off backwards...

Edited by ECR33_RB25DET
ECR33_RB25DET Community Regular

ECR33_RB25DET

Posted
  • Author
Posted

Do you have the buttons Pete?

I have a spare seat here. All electrics working.

All good Chris. I have new modules for drivers and passenger seat.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Definitely tried this Scott. The plastic trims that are fixed to the rear of the seat rails don't appear to simply slide off backwards...

Is that your way of saying you would like me to do the job? :P

Pissermoff and put in some Recaros, the stock seats are like a park bench... With a heater.

ECR33_RB25DET Community Regular

ECR33_RB25DET

Posted
  • Author
Posted

I would love to pissermoff and put in some R35 GTR seats buts thats a big expense. Yes the stock are not the most comfy but they are leather...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...