Jump to content
SAU Community

Nm35 Stagea Afm Fault

Daleo

By Daleo,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Daleo Grand Master

Daleo

Posted
Posted

So, I've had an interesting week or so.

When my car was started from stone cold; it had no issues. I could drive to work, leave the car all day, then drive home again.

If I stopped fill up, or go & do some shopping, then restarted the car; initially, it would randomly stall at idle, and throw a CEL code; P0100, which is the AFM. It did it once, then not again for several days. Reset code; no issues.

If restarted, the car would drive normally. Progressively over a week or so, it would stall more regularly on a hot restart.

Then t would throw the light immediately at hot start, and when you accelerated, it would get to 2200rpm, and start stuttering as if the AFM was disconnected.
After a few minutes of driving it would behave as normal.

I replaced a very dirty air filter, but no real change.

Cleaned AFM; no change.

It occurred to me, that on my Informeter; if the intake temp was above approx 35-40 deg; the problem would manifest, and it started doing the same thing if driven in traffic, and the Intake temp rose to the set level.

Eventually, the CEL would not reset, but as long as the Intake temp was around ambient or below 35 deg, the car would drive perfectly.

Replaced AFM with the spare I had from Scotty (for just such an occasion) reset CEL; issue hasn't reoccurred.

Very strange.

Can anyone with an Informeter tell me what their AFM reads when the engine is NOT started? Just with the key in the ON position?

Mine is roughly 1.02v even before being started. Settles around 1.47-1.50 at idle.

Cheers guys, hope this helps someone. I've never seen an AFM fail in such an unusual and random fashion.

Link to comment
https://www.sau.com.au/forums/topic/446016-nm35-stagea-afm-fault/
Share on other sites
Daleo Grand Master

Daleo

Posted
  • Author
Posted

Yep, it sounds about right at 1v. The afm can actually read reverse airflow down to 0v.

Hey mate, thanks for that. :worship:

Can you put me on the list for a replacement when you have some? I'll forward some cash to you in the next couple of days. ;)

Daleo Grand Master

Daleo

Posted
  • Author
Posted

I have plenty mate, can you try out my new site for me? I want to check it works.

http://scottyscustoms.com.au/product-category/m35-stagea/

Looks to be working fine mate. :yes:

Nice looking site !

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Looks to be working fine mate. :yes:

Nice looking site !

Thanks. A customer did some bartering with me. :)

Mobile friendly, shopping cart, built in postage calculator. Now I have to find the time to insert all the product data. :/

  • Like 1
Brick Mentor

Brick

Posted
Posted

Thanks. A customer did some bartering with me. :)

Mobile friendly, shopping cart, built in postage calculator. Now I have to find the time to insert all the product data. :/

Looks good scotty.. simple and it works. Needs more M35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

    • Rezz
      Chris' Toyota Mark ii JZX110

      By Rezz · Posted

      Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

      Trailer got new mudguards to accommodate the new wheels Lightweight ally Painted, stickered and done ✅ 👌  
×
×
  • Create New...