Jump to content
SAU Community

Recommended Posts

Chrome paint is pretty crap, even the expensive cans lose their lustre very quickly when exposed to ... anything really... you can't sand it back for a smoother finish because you take away the chrome-ness of it and you cant spray clear over the top either because it does the same.

This is my experience.

Link to comment
https://www.sau.com.au/forums/topic/44645-chroming/#findComment-912409
Share on other sites

If you want stuff Chromed, bring it to me, I'll take it to the people who chrome stuff for our machines.

The Chrome paint is bollocks.

It's cheapish to chrome stuff properly....

What are you chroming??

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/44645-chroming/#findComment-912423
Share on other sites

Not that it really matters for interior bits, but remember that chroming does add signifcant weight (and it can also blind you with its bling-bling looks) :)

LW.

that extra 500g of paint will really slow the car down :)

for just interior bits just use a can of $15 paint with some decent primer underneath i say davor

hows adele (the missus) by the way?

Link to comment
https://www.sau.com.au/forums/topic/44645-chroming/#findComment-914165
Share on other sites

this is what i did with chrome paint on my inside and i was fairly happy but 2GU UP 2 inside looks way better so now im thinking about getting them chromed

http://www.skylinesaustralia.com/photopost.../cat/500/page/1

http://www.skylinesaustralia.com/photopost.../cat/500/page/1

Link to comment
https://www.sau.com.au/forums/topic/44645-chroming/#findComment-915034
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...