Jump to content
SAU Community

Recommended Posts

will be surprised if mine pop,im pretty fussy about double checking all clamps and i dont use shit radiator clamps like some people out there,got to use the good bolt down clamps.

finished the pipe work and test run car and all seems ok,double checked the clamps and the car seems to sound and go a bit better as inlet pipe now not getting heat soaked so will see how it all goes tomorrow.So who else is going from the club?

it was wet but sooo much fun,had the skyline drifting sideways through most corners and a good bunch of guys to run with,would like to thank qeo for a great event and hopefully more skylines turn up next time,and no popping off of my intercooler pipes and they are so much better than before,the intake pipe now only gets warm not roasting so return flow setup works a treat.

  • Like 1

yeh was pretty good,had an 86,gto mitsi,an audi tt,subaru legacy,evo 5,6,8 and 10,oh thats right there was one two toned skyline that was sliding around everywhere,whore of a thing,was shaking its arse to all the evos.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So I put it to 3bar (43.5psi) while priming. It stays at 43.5~ as I crank shakes slightly. Ive also tried dropping pressure to see if that changes anything. I replaced the fuel dampener because I was troubleshooting the system along with the stock FPR (swapping them one by one to rule them out). But i only got up to changing the dampener and it started running again. Injectors are stock second hand. I did a bench test on both my original ones and the secondhand ones. The second hand injectors I have in the car now spray slightly stronger than my original injectors.
    • I knew Andy from about then, it did some cool stuff. By 2005/2006 era, he also implemented closed loop ignition timing tuning. In 2004 it was pretty cool, being with him when he was doing automated fast self learning tuning!
    • Im No tuner but…. im running a 25det with north of 600wkw at 9000rpm e85 and water meth. G40 1150 on 32psi. Having a real built head will flow a crap ton more power but you being stuck at 7600 won’t be helping at all, throw all the boost you can and nothing will happen. Solid lifter and 9000rpm is the only way,  I have built my motor 3 times, not from engine failure but more along the lines of my failures in not understanding engine parts better, basic phrase to help, “block hold power”  “head make power”   
    • What's the fuel pressure while the car is cranking? Curious, why did you replace the fuel damper? What injectors are you using, are they brand new?
    • I think it's terrible value, it should be half that price IMO. And I'm known as someone who will unironically suggest the GTIII-SS on the RB26 if you have very specific requirements. The GCG RB25DET "hybrid turbo" is 1/3rd the cost of this GTIII-RS kit and sounds like it should fit with zero modifications. Talk to Hypergear as well, maybe they can do something that fits your requirements.
×
×
  • Create New...