Jump to content
SAU Community

Recommended Posts

Your explanation of the PCV is making sense to me; however in this scenario, wouldn't the PCV still be closed even though the crankcase is under positive pressure: -

It depends on how much negative pressure the Venturi system is creating and how much positive pressure is in the intake, as soon as there is boost in the intake the PCV closes and the gases are meant to go to the I take of the turbo

[\quote] I'm driving hard on boost - Positive pressure in crank case causing the PCV, negative pressure from the venturi in the pipe leading to the valve. In this scenario, I would expect the valve to be shut but shouldn't it be open to vent the crank case so that the blow by isn't just venting out of the catch tank - it obviously has no where else to go does it?

That's right, the positive crankcase pressure should be getting sucked out by the Venturi since the is boost pressure in the I take manifold it can not go in there as the boost pressure will cause the PVC to close

[\quote]So, I then take my foot off the gas and theoretically I should be in a vacuum/negative but the crankcase won't have vented because it has no where to go so. I then have very little suction (well a little bit), from the venturi port and still positive pressure which means the port is still closed...

This is when the PVC will open and draws gases away from the cam covers pulling gas out of the crank case, the PVC is controlled by the intake manifold unless the Venturi system is creating a higher vacuum level

[\quote]

This is what I don't understand

This is the PCV valve that the venturi port connects to:

rb26dett_pcv_valve_1.JPG

Now, I see that in some race car setups, they actually have a vacuum pump; even in this scenario, isn't the PCV still always just closed?

The Venturi connects to the exhaust side cam cover, the PCV connects to the intake side cam cover and the two covers are connected to each other but both have the volume of cam covers and head and well crank case to draw from effectively separating them from each other

The crank case should never be in negative pressure with out external help as even at idle there is blowby just not much

The vacuum pumps that race cars have is because they are using stupidly long duration cams and have lost the intake vacuum in doing so so they have to create it somehow, which should not be connected through the PCV as it would just cause it to close

Okay right, so I have custom intake and exhaust cams on this car! (TODA 264 9.3mm).

Currently with the operation of the PCV valve though, if the positive pressure inside the crankcase is higher, the valve remains shut? because that's currently what happens if I simulate the effect by blowing on the side with the screw

The PCV screws in to the balance tube on the intake manifold so the threaded end is seeing what ever the intake manifold is doing

So vacuum created by shutting the throttle bodies opens the valve and when the throttle bodies are open and boost is going into the intake manifold it closes the valve :thumbsup:

264s are not stupidly long duration, 280+ is getting stupidly long :(

Who does your tuning and what ECU have you got ?

Hey,

So, this is where the PCV is connected to; straight off the end of the black pipe that comes from the intake cam breather. I thought that's the valve cover not the intake manifold.

EyQU6DZ.jpg

I have an Apexi Power FC ECU; I do a lot of the tuning myself and with the original owner but I'm ok with the tuning aspect; I built my own det cans and have the AFRs at 11.5 on boost with 12 coming on to boost. I run idle at around 13.9 as the cams don't take idling at 14.7. The ignition timing is a bit more convoluted to explain but that should be good too. The CAS is set by the original owner and I haven't touched that and the boost controller is a greddy protecB that I manage the boost with.

We use venturies on our mining equipment to vac out the dust collectors on the air filter box's, but the actual venturi pipe is located just inside the tip of the exhaust, so as the gas expands out it creates a negative at the end of the vac pipe,

It took quite a bit of trial and error to find the perfect distance from the tip, but it wont inside the exhaust near the turbo with that much pipe left!

  • Like 1

Lol! yeah quite correct... it did work kinda but if your oil air seperator isn't up to the task you just draw through oil vapour and make a nice smokey exhaust. i still have one connected....but my issue was not ventilating enough i.e venting through a size smaller than the two 5/8 vents off the cam covers effectively pressurizing my catch can.

Xgtrx, no, positive pressure from the exhaust never reaches the PCV because of the one way valve. My original post shows the valve that stops any exhaust gases travelling back up.

If exhaust gases were getting up, they would actually open the PCV valve which is what I don't really understand and I the opposite case of what I've been asking about

Yeah but if both valves are closed when the car is on boost, where is the positive crankcase pressure going, the only way out is through the dipstick, yes? It can't be scavenged through the exhaust because the exhaust gasses would causing positive pressure compared to the crankcase. Or have I got this totally wrong?

That is correct except for the reasoning behind why the gases aren't being sucked out. They aren't being sucked out because any suction closes the PCV valve, which surely can't be right?? and I believe that's why oil is going out the dipstickbut I can't understand why someone clever enough to build an engine and set up all the timings etc would fit a Venturi to a valve that never releases any positive pressure from the crankcase. It seems to me like if a Venturi is being used, then a PCV valve is not the correct valve to use.

I am not advocating for or against the use of Venturi to create negative pressure, nor am I saying I will keep this solution, but if this setup, in theory, were supposed to work, how would having a PCV valve connected do anything if it only opens on positive pressure from the exhaust side, for which there never will be any because of the one way valve not allowing any exhaust gases through. The tube that connects to the PCV in this setup is always under vacuum. The Venturi is creating good suction at idle and even more as the rpm increases which implies to me that all PCV valve will never be open.

Your thinking to big picture and in this case that's not how to do it

What you have is two differential valves, one is controlled by the intake manifold and the other is controlled by the exhaust pipe and while in theory this should work the practical side of mean both valves shut at the same time

The intake one closes as soon as the throttle opens, when the throttle is open the exhaust gas increases to the point there is backpressure which closes the exhaust side one

now this is where you need to read carefully, while there is more pressure on the outside of the valves then the inside they remain closed so the crankcase is building pressure from blowby which is lower then the intake pressure and exhaust back pressure it has nowhere to go except out the dip stick tube

What you need to find out is what the Venturi is doing at full noise when the exhaust back pressure is at its highest and the motor has full boost level

  • Like 1

Xklaba, starting to understand I think.. Although I can't imagine that much back pressure. It is 4" all the way through to a tiny back box and doesn't have any cats.

Maybe I'm still a little confused but am I wrong in thinking that the gases should be escaping through the PCV valve?

No exhaust is going to have zero back pressure no matter how fee flowing it is. The exhaust is being pushed into the exhaust pipe.

I have to disagree with that, an old mate of mine had an exhaust that was 3" dia and 4" in lenght with seperate screamer pipe on his turbo R1 :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...