Jump to content
SAU Community

Recommended Posts

Hi guys,

I have 94 32 GTR. My gears feels very crunchy especially when it's cold. Takes around 50ks to be ok.1st gear is very hard to put in. It has a short shifter put in it. Not sure if it's masking the syncros. Doesn't feel smooth at all. Very stiff n rigid. It's crunchy when put into 1st,then changing into 2nd, 3rd, 4th and 5th. But the crunch is worse at 1st,2nd and 3rd. I need advice. Pls help.

Thanks.

Sent from my iPhone using SAU Community

As Nizmo said maybe start budgeting for a GB rebuild.

Check your gear shifter bush (standard is white plastic washer at the end of your gear stick)

Change your GB oil and I'd suggest going a stock Shift stick.

(under $100 new, a lot less for 2nd hand).

32's are also known for being more difficult to get into gear when the GB is older and cold

Short shifters are naturally harder to get into gear so this just exasperates your issue

Edited by Sinista32

-> mashing the Syncro's on your gearset <-

now take time to warm it up and change slower. take the advice above

save up to put something like an OS gieken gearset into it.

Unless your a racecar driver or got money to throw at something better that is !

It's a 32GTR and the gearbox / syncros are the worst of the bunch and they're OLD

Thx guys! I might go back to a normal shifter and prob change the bushing too. Is there anything else u guys reckon I shd change jus to keep it going? Not exactly the rite financial time to get another box.

The synchros are worn down too far to allow the gear to slow down enough to engage. Hence why its crunching

Just baby it or try double clutching until you can afford a 2nd hand box or rebuild

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...