Jump to content
SAU Community

Recommended Posts

Wrecking R32 GTS-T.

Main items listed below, however too many parts to list them all. If you need something, just ask as there is every chance i'll have it.

Also have a few other random parts from RB25 and RB26. See bottom of post.

Pickup from either Traralgon or Melbourne - Sth eastern suburbs.

Happy to post if buyer pays postage.

Can supply more info and better photos for anything on request.

PM, or call / SMS - Mike 0412 678 973

Front guards - Both LHS & RHS. Black. No dents or creases. $50 each

Rear bar (not inc reverse lights) $60

Boot lid $50

Headlights $80 each, or $150 pair

Rear lights $40 each, or $70 pair

Indicators - 1 x LHS clear, 1 x LHS orange, 1 x RHS smoke $50 each

Complete dash - has the bubble in the usual place. See pics. $100

Glove box/s $30

Center console/s $30

Speedo/gauge cluster 139xxx km's $80

Speedo surround (inc headlight switches etc) - one in standard black, one painted silver - see photos. $60 each

Kick panels LHS & RHS available $20 each

Steering wheel surround plastics $30

AC/Climate control unit $40

Plastic stereo surround - painted silver - cracked at bottom $20

Gearbox/manual conversion kit - everything except flywheel $750

Top mix racing seat - no rails. Set up in fixed position in R32. $80

Standard seats - driver and passenger - good condition $35 each

Standard radiator $80

Standard fan $20

R33 RB25 tailshaft $100

Standard RB26 turbos - excellent condition $250

RB26 airbox $60

More available that i have forgotten about. Just ask if you need anything in particular.

Prices on most things are negotiable. Happy to consider reasonable offers.

Mike - 0412 678 973

post-33046-0-78731800-1409816106_thumb.jpg post-33046-0-57055900-1409816198_thumb.jpg post-33046-0-99932000-1409818789_thumb.jpg

post-33046-0-22025200-1409818889_thumb.jpg post-33046-0-31316100-1409819347_thumb.jpg post-33046-0-60879800-1409819784_thumb.jpg

post-33046-0-23047500-1409819995_thumb.jpg post-33046-0-25775100-1409820120_thumb.jpg post-33046-0-77783400-1409820522_thumb.jpg

post-33046-0-08354700-1409820666_thumb.jpg post-33046-0-81143200-1409820773_thumb.jpg

Edited by xtra.5

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Mate, I'm looking for the driver side rubber strip that goes between door card and the glass on the inside. If in good condition

Got it?

Do you mean the felt bit that is attached to the top of the door trim?

any updates mate? have you got this trim part?

Hey mate, ive got it but not in good condition. its not straight and wont provide a good seal against the window.

Manual conversion sold.

Drivers headlight and passenger rear light sold.

Boot lid and rear bar sold.

Still got plenty here.

Also have R32 RB20 ABS Tailshaft available $100

Hybrid (i think) front mount cooler $60

  • 2 weeks later...

Interested in the:

Stock Seats

Clear indicator

Glove box (I hope this is the same as 4-doors)

Stereo surround

AC/Climate control

DIN brackets if you happen to have them

pick up SE burbs.

Interested in the:

Stock Seats

Clear indicator

Glove box (I hope this is the same as 4-doors)

Stereo surround

AC/Climate control

DIN brackets if you happen to have them

pick up SE burbs.

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Finally have an update on this  Rack came in this week so I did a test fit. You do need the S chassis bushings since the rack is 5mm thinner than the R33 rack. The main issue I foresaw and ran into was one of the hardlines not lining up properly with there it's meant to on the rack. After some gentle coercing and bending very slightly, I managed to get it to fit without any kinks and keeping the hardline pretty much in all of the factory mounting positions. I did have to unbolt all of the soft mounts to move the line around so I could snake it out and bend it safely but it looks good to me for now. I'll update when the rack is fully bolted in and functioning.  
    • I hear this thread needs an update following its adventures last Wednesday!
    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • Sequential Is fine to drive on the street
×
×
  • Create New...