Jump to content
SAU Community

Cost

slip

By slip,
in Queensland

 Share

Recommended Posts

slip Mentor

slip

Posted
Posted

Cars and motorsport are not cheap things. A drift day at QR can be pretty cost effective, Morgan Park track days are fairly cheap, if your car is set up for it, QR sprints aren't too bad either. Neither are skidpan days. The Dutton rally on the other hand, is over $1600 to enter. Plus tyres, plus accomodation, plus everything.

I know skidpan days well, so that's what I'll talk about. All you people who say you "can't afford it" or its "too expensive" should think about the following.

I am planning on having a full skidpan day every 3 months from now on. Say its $180 to enter. There are 90 days between skidpan days, so you only have to save $2 a day, to afford a full skidpan/time trial day every 3 months. As far as other costs go - you don't go through a set of tyres, its not hard on the clutch, or anything else for that matter. I probably wear my tyres more on a few mountain runs than a full skidpan day. It's a very cost effective low risk event. Yes something on your car might fail - but it somethings going to break, it's going to break no matter where you are. $2 a day for an awesome full day event (and lunch!) is very very cheap. You can run almost anything, its a fairly even playing field - stock VL's to GTR's, doesnt matter.

Morgan Park track days are also great, more tyre wear if you don't have your wheel alignment sorted (i didnt), but you can go out there in a road car and have a blast. Low entry cost, but it is a bit of a drive.

$2 a day.....

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/
Share on other sites
hungry6 Experienced

hungry6

Posted
Posted

I went for a track day organised by a major manufacturer on wednesday and got to drive some pretty groovy machinery, and then got served continental lunch, and was given a gift before i left for home, and didn't cost a cent.

So unless your dealing i'm not coming.

on a lighter note $180 isn't alot, for a dayful of fun with a bunch of decent ppls

or u can go and sit at the local plaza and stare at the dredge of the society for nothing.

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917330
Share on other sites
jlnewton Grand Master

jlnewton

Posted
Posted
Hi slip,

I'm not having a go so dont take this the wrong way...

The only skidpan day I attended was about $90 from memory, however current days have doubled to $180.  

What has caused the price hike since I last went... More track time, lunch, more professional drivers?

Correct me if I am wrong Shane, but you attended the last one I went on last year and if was only a half day, pan only day. Not a full day, pan and LVMA day.

lol at SLIP

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917394
Share on other sites
GTRman1992 Proficient

GTRman1992

Posted
Posted

What is the track time expected for the day per driver ?

Morgan Park is great value, I organise a day there and it costs around $35 a head. And most people are sick of driving by the end of it. 40 to 50 laps for the really keen.

The track is also good. Reminds me more of the street than a race track. No worries with oil surge etc, like if you go to QR.

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917870
Share on other sites
slip Mentor

slip

Posted
  • Author
Posted

just lvma and skidpan.

the lvma is a large area with water bubblers on it that leak water onto the surface, some of its dry, some of its wet, and a small part of it is actually linoleum - which is tricky. They set out 3 time trial runs with cones. 1 slalom with a diamond at the end, you run through, round the diamond, run back. 27secs is quick. The other one is a launch, left turn, sprint down a straight, then a 4 cone clover leaf style section, then sprint back. 40secs is quick. Half the group does each one, then you swap. Then we use the whole area in a large time trial. I forget what the times are for that. In the now infamous words of Tze, you can go for time, or go for sick! Tze prefers the latter. If you try too hard to get a quick time and stuff up, the worst that will happen is you might tap a cone.

I think it's cheap, for what you get, the low risk, and low vehicle wear.

Check the last "skidpan day pics" thread for LVMA pics.

Also - how many other events can you do where an NA 31 has a chance against 33 GTSt's, noone cares what you drive, and with such a great friendly atmosphere? The lunch is good too.

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917966
Share on other sites
strutto Grand Master

strutto

Posted
Posted
just lvma and skidpan.

the lvma is a large area with water bubblers on it that leak water onto the surface, some of its dry, some of its wet, and a small part of it is actually linoleum - which is tricky. They set out 3 time trial runs with cones. 1 slalom with a diamond at the end, you run through, round the diamond, run back. 27secs is quick. The other one is a launch, left turn, sprint down a straight, then a 4 cone clover leaf style section, then sprint back. 40secs is quick. Half the group does each one, then you swap. Then we use the whole area in a large time trial. I forget what the times are for that. In the now infamous words of Tze, you can go for time, or go for sick! Tze prefers the latter. If you try too hard to get a quick time and stuff up, the worst that will happen is you might tap a cone.

I think it's cheap, for what you get, the low risk, and low vehicle wear.

Check the last "skidpan day pics" thread for LVMA pics.

Also - how many other events can you do where an NA 31 has a chance against 33 GTSt's, noone cares what you drive, and with such a great friendly atmosphere? The lunch is good too.

:cheers:

Pics from the last one are at: www.skylinesaustralia.com/members/strutto/skidpan

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-918038
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • wizlb
      Who has a Infiniti Q60, Q50 (V37)?

      By wizlb · Posted

      I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Kinkstaah
      Starting again

      By Kinkstaah · Posted

      Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...