Jump to content
SAU Community

Recommended Posts

Nitto oil pump brand new only test fitted to car $1100

RB30 series 2 block standard bore $200

CP forged pistons 20 thou oversized with the largest pins available capable of 2000hp (also comes with

standard size pins as well) suit rb30 $1000 brand new

Npc twin plate clutch suit r33 gtst and r32 gtr, only done 400km $1400

R33 r34 rear toe control arms harden rubber hardrace brand, brand new $120

Russ toffbond metal jacket balancer excellent condition $500 suit rb25

Cometic mlsr head gasket suit rb26 and rb30 brand new $170

Rb26 valley cover, timing cover and timing backing plate $250

Rb crank collar brand new $70

Arp rb30 main studs brand new $200

Arp rb25 head studs brand new $200

RB underdrive pulley kit (power steering, alternator, water pump) brand new blue in colour $75

Rb2530 tensioner idler and belt set up only fitted to engine $130

Nismo engine mounts r33 hicas $150

Dynamat bulk extreme kit $170

R33 power window arm with motor $50

H1 hid kit Chinese brand, brand new $25

Located North Brisbane Caboolture area

More parts to come, can sms pics if genuinely interested

Thanks, Matt 0498 188 451

Link to comment
https://www.sau.com.au/forums/topic/449432-lots-of-rb-performance-parts/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...