Jump to content
SAU Community

Recommended Posts

high flowed with bearings and seals 1200 the only reason i did it was coz my oil seals in my turbo went but yea i got a dual stage boost controller aswell r u sure its the cooler not the fuel pump thats not letteing ur boost go up coz its happened to a few friends of mine the pump goes.

Guest INASNT
Originally posted by driftr33

high flowed with bearings and seals 1200 the only reason i did it was coz my oil seals in my turbo went but yea i got a dual stage boost controller aswell r u sure its the cooler not the fuel pump thats not letteing ur boost go up coz its happened to a few friends of mine the pump goes.

nope fuel pump and injectors r running well! fuel pump cant effect how much boost u run, if the fuel pumps not running well then it will just run the engine lean!

its the cooler cause guy who got same power as me with same mods got a new FMIC put on and got his car dynoed right after me and he got 169kw@wheels at 9psi!!

in reality when u r running 12psi at intake the turbo will be running about 14psi atleast with the pressure drop being through the pissy small stock IC!

INASNT, where did you get your S-AFC tuned and how much? Have you thought about Water/methanol injection? Its half the cost of a FMIC, legal and unless you race around a track to get enough air flow through a big FMIC , works more efficiently on the street. Although a big FMIC does look cool!

Guest INASNT
Originally posted by the_tonkau

INASNT, where did you get your S-AFC tuned and how much? Have you thought about Water/methanol injection? Its half the cost of a FMIC, legal and unless you race around a track to get enough air flow through a big FMIC , works more efficiently on the street. Although a big FMIC does look cool!

Me and Grim were gonna put a water spray kit on the intercooler but in the end its not worth the stuffing around as the stock IC has such a small surface area where the air is cooled its pointless!

I got my s-afc tuned by the guys at ICE PERFORMANCE and it cost round $100.

I didn't mean a IC spray kit, but a true injection system via the intake plenum. No pinging, lower intake temp and more power at lower boost. For eg, A swisho system that Group A rally cars use only costs about $900 fitted against about $1600 for a DECENT fmic!. Less lag too over! as you don't have the big pressure drop of a huge cooler.

$100 sound good for a AFC tweak, will have to get down there!

Guest INASNT
Originally posted by the_tonkau

I didn't mean a IC spray kit, but a true injection system via the intake plenum. No pinging, lower intake temp and more power at lower boost. For eg, A swisho system that Group A rally cars use only costs about $900 fitted against about $1600 for a DECENT fmic!. Less lag too over! as you don't have the big pressure drop of a huge cooler.

$100 sound good for a AFC tweak, will have to get down there!

oh ok, water spray for intake is a very good idea, and seem it work on cars running lots of boost, but no intercooler!

But u need sum sort of controller to control the system properly!

The 1'c i have seen incorporated it with an Autronic SMC ecu system.

Originally posted by the_tonkau

I didn't mean a IC spray kit, but a true injection system via the intake plenum. No pinging, lower intake temp and more power at lower boost. For eg, A swisho system that Group A rally cars use only costs about $900 fitted against about $1600 for a DECENT fmic!. Less lag too over! as you don't have the big pressure drop of a huge cooler.

$100 sound good for a AFC tweak, will have to get down there!

Alcohol (isopropyl) injection is better than water(water is good though). The stock ic has plenty of pressure drop BTW, it has fairly poor flow. A modest sized front mount like the trust will increase air flow speed over the stock one (ie: less lag).

Look at it this way..

Summer is on the way.

AUS temps go pretty high in summer.

Just yesterday it was like 30 degrees and it's only going to get higher.

The standard cooler in winter is probably good to work efficiently at 12psi or less.

in summer, that standard cooler isn't going to do shit.

Get a good front mount and you will see an immediate improvement over the stock item.

If you have spent the money on getting a steel wheel on your turbo, then at the moment you won't be able to use that power until you change your standard pissy cooler.

You know the drill...

exhaust, filter, cooler, boost.

don't worry about water/metho injection or whatever...

do the basics first.

Keep an eye out on the forums for intercoolers that come up for sale.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...