Jump to content
SAU Community

Recommended Posts

Hey all

Took the track car out to the 1/4 mile drags on the weekend.

Wasnt a full on meet or anything more a come and try / test.

My HUGE problem was bogging down hard at the start, not being able to launch at all.

Running slicks i couldnt get off the line at all.

Car is a r33 gtst has 335kws, manual etc

it didnt matter how many revs i put through it nothing was working for me.... any ideas??

Once off the line and going was strong

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/449899-bogging-down-launch/
Share on other sites

What time did it run? What 60 ft? Post the slip please.

Your running a 3076r hta right? That should get on boost pretty quick. Perhaps it's down to the tune, did you get the temp sensor in place and a retune yet?

I was out there in my stagea , had dramas first pass and couldn't be stuffed sorting it. Ran a 13.5 at 105 woth a 2.48 60 ft. with problems from a half track. 1 second slower than last time but still 2 seconds quicker than the other stag out there! The extra lag of gt35 and stock converter certainly didn't help...... was a bit over the car lately so happy to just park it.

I didn't notice your car, I would have said hi.

What time did it run? What 60 ft? Post the slip please.

Your running a 3076r hta right? That should get on boost pretty quick. Perhaps it's down to the tune, did you get the temp sensor in place and a retune yet?

I was out there in my stagea , had dramas first pass and couldn't be stuffed sorting it. Ran a 13.5 at 105 woth a 2.48 60 ft. with problems from a half track. 1 second slower than last time but still 2 seconds quicker than the other stag out there! The extra lag of gt35 and stock converter certainly didn't help...... was a bit over the car lately so happy to just park it.

I didn't notice your car, I would have said hi.

Hey mate i didnt get the slips from it. i cbf was pissy lol... i should have but threw in the towel after 3 runs. Will get back out as soon as the car is better sorted.

Na its still not sorted at all, boost comes on late still. The only reason i ask there was a few stockish 32s and 33s getting off the line a hell of a lot better then me with less hp.

I can only remember it ran into the high 12s each time

Was yours the white stag??

I was there late late. as i wasnt going to do it then decided to....

But had my bright yellow LH torana out there early if you saw that? but also had trouble on the day with that also.. hence why the towel was thrown in early and no slips were got lol.. all round had a shit day lol.

The Torana should run into the 11s but best that was sqeezed out was 12.3 with it breaking down from launch to mid track then ran perfect from there

Edited by Adz2332

My stagea is silver, the white one was running 15s.

I saw the torana and could hear it misfiring etc. Looked tidy though. Drag racing is heaps frustrating sometimes hey!

Don't be afraid to use the anti lag.

My stagea is silver, the white one was running 15s.

I saw the torana and could hear it misfiring etc. Looked tidy though. Drag racing is heaps frustrating sometimes hey!

Don't be afraid to use the anti lag.

Ah ok didnt see your silver one

Yer was missing but in second gear from mid track onwards was strong so will have to look into it. changed the carby jets and timing on the fly which made a little difference but will take it back and chuck it on the dyno and getting it back up....

Actually the Torana could have been petrol issue. was running avgas but couldnt get any so added 100 octane to it.. so it may not have liked the mixture.

So thats when we decided to shelve it and got my car out only for that to have problems lol....

bloody cars

and right now im in two minds....

I love drags and doing like mallanats etc.. but i wanted this car as an alrounder. like have a crack at drifting, hill climbs etc....

But a 2 speed power glide would make a big difference..........

You never answered what rpm you were launching at? The guy you were answering has a GTR, he may as well be the same as a GTS25t on slicks. On sticky tyres I was needing to launch mine over 6000rpm with a normal GT3076R.

What kind of trap speeds were you running, out of interest?

Ahh ok yer i have slicks on it.

i was launching from, started trying at 4000 then to 5000 then eased it off the line which actually did the best.....

Trap speed was around 110. i should have kept the slips, but between both cars had a frustrating day!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...