Jump to content
SAU Community

Bogging Down - Launch

Adz2332

By Adz2332,
in Motorsport Discussion & Builds

 Share

Recommended Posts

Adz2332 Grand Master

Adz2332

Posted
Posted (edited)

Hey all

Took the track car out to the 1/4 mile drags on the weekend.

Wasnt a full on meet or anything more a come and try / test.

My HUGE problem was bogging down hard at the start, not being able to launch at all.

Running slicks i couldnt get off the line at all.

Car is a r33 gtst has 335kws, manual etc

it didnt matter how many revs i put through it nothing was working for me.... any ideas??

Once off the line and going was strong

Edited by Adz2332
Link to comment
https://www.sau.com.au/forums/topic/449899-bogging-down-launch/
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

What time did it run? What 60 ft? Post the slip please.

Your running a 3076r hta right? That should get on boost pretty quick. Perhaps it's down to the tune, did you get the temp sensor in place and a retune yet?

I was out there in my stagea , had dramas first pass and couldn't be stuffed sorting it. Ran a 13.5 at 105 woth a 2.48 60 ft. with problems from a half track. 1 second slower than last time but still 2 seconds quicker than the other stag out there! The extra lag of gt35 and stock converter certainly didn't help...... was a bit over the car lately so happy to just park it.

I didn't notice your car, I would have said hi.

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted (edited)

What time did it run? What 60 ft? Post the slip please.

Your running a 3076r hta right? That should get on boost pretty quick. Perhaps it's down to the tune, did you get the temp sensor in place and a retune yet?

I was out there in my stagea , had dramas first pass and couldn't be stuffed sorting it. Ran a 13.5 at 105 woth a 2.48 60 ft. with problems from a half track. 1 second slower than last time but still 2 seconds quicker than the other stag out there! The extra lag of gt35 and stock converter certainly didn't help...... was a bit over the car lately so happy to just park it.

I didn't notice your car, I would have said hi.

Hey mate i didnt get the slips from it. i cbf was pissy lol... i should have but threw in the towel after 3 runs. Will get back out as soon as the car is better sorted.

Na its still not sorted at all, boost comes on late still. The only reason i ask there was a few stockish 32s and 33s getting off the line a hell of a lot better then me with less hp.

I can only remember it ran into the high 12s each time

Was yours the white stag??

I was there late late. as i wasnt going to do it then decided to....

But had my bright yellow LH torana out there early if you saw that? but also had trouble on the day with that also.. hence why the towel was thrown in early and no slips were got lol.. all round had a shit day lol.

The Torana should run into the 11s but best that was sqeezed out was 12.3 with it breaking down from launch to mid track then ran perfect from there

Edited by Adz2332
Ben C34 Grand Master

Ben C34

Posted
Posted

My stagea is silver, the white one was running 15s.

I saw the torana and could hear it misfiring etc. Looked tidy though. Drag racing is heaps frustrating sometimes hey!

Don't be afraid to use the anti lag.

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted

My stagea is silver, the white one was running 15s.

I saw the torana and could hear it misfiring etc. Looked tidy though. Drag racing is heaps frustrating sometimes hey!

Don't be afraid to use the anti lag.

Ah ok didnt see your silver one

Yer was missing but in second gear from mid track onwards was strong so will have to look into it. changed the carby jets and timing on the fly which made a little difference but will take it back and chuck it on the dyno and getting it back up....

Actually the Torana could have been petrol issue. was running avgas but couldnt get any so added 100 octane to it.. so it may not have liked the mixture.

So thats when we decided to shelve it and got my car out only for that to have problems lol....

bloody cars

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted

and right now im in two minds....

I love drags and doing like mallanats etc.. but i wanted this car as an alrounder. like have a crack at drifting, hill climbs etc....

But a 2 speed power glide would make a big difference..........

Lithium Grand Master

Lithium

Posted
Posted

You never answered what rpm you were launching at? The guy you were answering has a GTR, he may as well be the same as a GTS25t on slicks. On sticky tyres I was needing to launch mine over 6000rpm with a normal GT3076R.

What kind of trap speeds were you running, out of interest?

Adz2332 Grand Master

Adz2332

Posted
  • Author
Posted

Ahh ok yer i have slicks on it.

i was launching from, started trying at 4000 then to 5000 then eased it off the line which actually did the best.....

Trap speed was around 110. i should have kept the slips, but between both cars had a frustrating day!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...