Jump to content
SAU Community

Recommended Posts

Good job man, slow speed manoeuvres are the most difficult skill to perfect!

As the fella at the end was saying; finding clutch friction point, with a little throttle, and controlling speed with the rear brake is the trick with low speed.

Having the drivetrain loaded, and utilising the gyro effect of the motor spinning, stabilises the bike; rather than the unavoidable jerky on/off action when using the throttle around idle.

It isn't so bad on a short geared, torquey single, but on a big bike with tall gearing (mine does 164km/h in first) you simply can't get away with riding at idle, with the clutch all the way out. Once you nail that, you'll never look back.

Great to be able to practice, and pick up tips from experienced riders. Nice job with the BMW as well.

  • Like 1

cheers Dale :)

Yeah I think a lot of it has to do with the bike, I basically sit upright like a pushy so I find slow speed manoeuvres to be a bit easier. There were a few others on the day who were struggling & they were on sports bikes ie ninjas & cb's etc.

It's a fantastic thing to have something like this for learners for free & in Sydney. Once I get more experience I wouldn't mind helping them out to keep these sessions running :)

  • Like 1

20150114_1903061024x719_zps078d6c85.jpg

Quick update. Now with added windkeeperoffythingamajig doovelacky. It's a genuine Yamaha accessory, was a super p.i.t.a getting to the bolts that hold it in place.

Me Rikey

I can tell the difference definitely. I can keep my visor open & it feels like a gentle waft of air. Should work well when winter rolls around, I can duck behind the screen :)

  • Like 1

Nicely done, your head was nice and steady.

Good to see everyone wearing protective gear though :/ lol

Dirt rider in me wanted your U-Turns to be more rear brake and clutch and slidy slidies haha

  • Like 2

Nicely done, your head was nice and steady.

Good to see everyone wearing protective gear though :/ lol

Dirt rider in me wanted your U-Turns to be more rear brake and clutch and slidy slidies haha

Shhhhh slides were off camera ;p

Majority of people did have protective gear, just took it off while we were on the course.

I wasn't complaining when the blondie took her jacket off ;)

It would appear another benefit of my windscreen is that my fuel economy has improved :)

Fuel light used to come on around 220km mark, now it comes on around 250k's

not bad for a bit of plastic

  • 3 weeks later...

Passed my MOST test with no errors. Sweet as!

db1_zpsd6q34t0a.jpg

Some pretty cool women ride the scooter & suzuki intruder next to my bike

20150214_123633%20800x543_zpsyow9juwa.jp

My project will amost be done, maybe in the next 2-3 months. Then I can focus my attention back on the old fairlady Z, poor girl has been neglected :)

Picking up my fuel tank & fenders from Craved Coatings first thing in the morning. Time to strip the bike (again)

Would probably have been a less messy affair if I rode the bike until empty before taking out the fuel tank lol

20150220_225322%201024x604_zpsnornwgyk.j

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...