Jump to content
SAU Community

Recommended Posts

after the success of RexNet trackday #1 they are at it again with #2. Already booked they are now looking to fill 40 car spots for the day. The day is very well run with ample track time for all. I hope you can come and join me punt around the track with some great people and cars.

Your spot will not be guaranteed until the full amount of money is deposited into the organisers account (as he has already pre-paid the full amount with his own money). Details below, taken from http://www.rexnet.com.au/forum/viewtopic.php?t=14799

Register your attendance here (after you've paid!):

http://www.skylinesaustralia.com/forums/ca...y=2004-8-27&c=1

Wakefield Track day is Friday August 27th 2004

probably the most fun you'll have in your car yet while learning a heap about your car, your driving and the limits of both put together in a safe and controlled environment.

no need to think that you aren't fast enough, or your car is not moded enough, the first time I went there was a stock Gemini and a stock Toyota Corolla from a car rental company racing around. we all had our first time, and had loads of fun in doing so.

I have booked the Track for REX.NET members and friends for a private track day for us only to give you a feel for what its like to be on a track and also see just how fun your car really can be.

again Wakefield Track day is Friday August 27th 2004

NOTE: I am booking the day out of my own pocket, so I will need for people to pay up before hand so I can finish paying for the track before the day.

Cost will be $80 per driver (+ $40 12 month Wakefield licence payable on the day if you don't already have one).

Please PM or email ([email protected]) me to arrange payment as soon as is possible, as payment will secure your spot in an ABSOLUTE maximum 40 car field.

Layout Everyone will be split into 4 groups and will be on the track in 15 minute lots, giving everyone fair time on the track, plenty of time to give drivers and cars a rest, with assurance of 15 minutes every hour on the track. More experienced drivers will be on hand to give the first timers a ride as passengers and also ride as passengers for the first few laps to show you the lines of the track

What Do I NEED to Bring? All you need to bring is a Helmet (can be hired from the track), long sleve shirt, Long pants and covered shoes (just some old sneakers).

Lunch the Tucker Shop will be open all day for refreshments

Please remember, I have organised this and paid out of my own pocket so need payment before the day to me to secure your spot. It will be a great and enjoyable rex.net event and opertunity for some more laughs

The last track day we had was a huge success and a lot lot of fun.

the Track

Here is an 11meg vid what a day at Wakefield is like

http://www.boostn247.com/wakefield/Kicksta...tartmyHeart.wmv

Here is a 16.9 meg video of a hot lap arround the track

http://www.boostn247.com/wakefield/kevwakefield2.wmv

and another 12meg of an MY99

http://www.boostn247.com/wakefield/wakefieldlap.mpg

List of names attending start here

1:Autosport

2:B005t

3:XSSIIV

4:Zak72

5:OzWRX

6:WREXED

7:Pedler

8:Sanchez

9:Bennoz

10:Tracka

11:Mattl

12: This could be you

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...