Jump to content
SAU Community

Recommended Posts

Enkei RPF1 18x10.5 +12 (Black) with brand new Hankook RS3 285/35/18s. All done max of 500km. You can still see the Hankook where the tyre meets the road. $2000.00 Wheels don't even have brake dust on them.

Trust T517z 8cm Turbos. Chris at racepace has inspected thinks they are in good condition. No play. Come with the front pipes to match $1000.00

Dump pipes. Trust I think. $100.00

ATS & Across Twin Plate Ceramic Clutch. Luke at Racepace has had apart if you want an opinion on it. In great condition. Pics attached. Done less than 1500km. $1000.00

Recirculation catch can $50.00

80 mm afms from RB25 series one motors. Seem perfect $100.00

Carbon Fibre front lip. In perfect condition. $200.00 You can see it on the car here http://www.sau.com.au/forums/topic/449000-rare-opportunity-r33-gtr-new-fresh-forged-rb26/

ACL Race series Forged pistons. These seem fine but as I don't know for sure what happened to motor they can go for $100.00

Custom 3.5'' exhaust with Varex 4inch muffler. I believe it is the vmk 18-400. With controller. $400.00 the lot. Muffler pretty much brand new. Pick up only.

Pod filters. They have drift written on them. Near new. Also has a guard. $100.00

Carbon Fibre cam cover. Brand new $50.00

R33 GTR crankshaft. Been modified for N1 pump etc. I havn't had tested but supposedly just redone by mechanic who had the car. $200.00 because I personally havn't had it tested to say what condition it is in.

All the photos are attached because I couldn't seem to post photos on the thread.

Everything is ONO and preference will be given to pick up buyers who can do cash. I will post at buyers expense.

If you want more photos just ask. There will be more parts to come as car is pulled apart further including 50mm radiator, Tein shocks with EDFC etc. I have priced everything I think to move fast however if anything is truly over prices please let me know.

I am in Croydon Victoria.

P.M. me for number.

Mick.

post-882-0-39502600-1419219822_thumb.jpg

post-882-0-44389400-1419219840_thumb.jpg

post-882-0-67251800-1419219852_thumb.jpg

post-882-0-05692600-1419219865_thumb.jpg

post-882-0-83257800-1419219875_thumb.jpg

post-882-0-48662000-1419219888_thumb.jpg

post-882-0-02020200-1419219937_thumb.jpg

post-882-0-07836100-1419219948_thumb.jpg

post-882-0-60808500-1419219956_thumb.jpg

post-882-0-71470100-1419219964_thumb.jpg

post-882-0-97142900-1419219972_thumb.jpg

post-882-0-43515000-1419219980_thumb.jpg

post-882-0-30108000-1419220192_thumb.jpg

post-882-0-31371200-1419220199_thumb.jpg

post-882-0-03937200-1419220549_thumb.jpg

post-882-0-44317100-1419220556_thumb.jpg

post-882-0-84983400-1419220563_thumb.jpg

post-882-0-86555500-1419220731_thumb.jpg

post-882-0-14944400-1419220745_thumb.jpg

post-882-0-80891000-1419220753_thumb.jpg

post-882-0-58976800-1419220765_thumb.jpg

post-882-0-54468200-1419220837_thumb.jpg

post-882-0-04330500-1419220845_thumb.jpg

post-882-0-58509300-1419220857_thumb.jpg

post-882-0-12301900-1419221140_thumb.jpg

post-882-0-30064600-1419221155_thumb.jpg

post-882-0-05674800-1419221162_thumb.jpg

post-882-0-38287000-1419221197_thumb.jpg

post-882-0-00517300-1419221209_thumb.jpg

post-882-0-26140200-1419221222_thumb.jpg

post-882-0-35998500-1419221293_thumb.jpg

post-882-0-19759300-1419221303_thumb.jpg

post-882-0-02316700-1419221311_thumb.jpg

post-882-0-49412900-1419221466_thumb.jpg

post-882-0-38032700-1419221511_thumb.jpg

post-882-0-63656100-1419221524_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/451971-gtr-parts-wheels-turbos-etc/
Share on other sites

Hey mate,

Any idea of mileage the turbos has done?

What power/boost have they ran before removing if you've any idea.

Hey mate,

Any idea of mileage the turbos has done?

What power/boost have they ran before removing if you've any idea.

No idea mate. Mopst of the car has done very few miles since being modified but I don't actually know.

Is that the right price for the trust dumps/front pipe?

Yes. Someone has said they want them already so I assume they are too cheap. Oh well his gain.

Hey mate,

any other info. of ACL Race series Forged pistons

and the way to deliver or post them to my place

thankx alot

What do you want to know about them? I don't know much about them other than they were going to be put back in the car when rebuilt but I'm going another way so using other pistons, rods etc so can sell these.

Where are you? Saudi Arabia?

Edited by Mick Trainer

hi there

i wanna take the item as its shown in your pic but pistons brand name? and champer ring missing from one of them?, connection rod brand name? any damege of their bearing means unuseful connection rod

yes i m from saudia arabia

so sorry about all of that Qs but looking for connection rod in good condition and heavy duity

last not lest how match money they will cost for you and delivery post in US Dollar

serious buyer

thankx

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...