Jump to content
SAU Community

Recommended Posts

[WA] RB28 T

Now we are coming to the conclusion of the build I thought I would chuck up a build thread of the overhaul of my R32 GTR completed by Galvsport in Perth, WA. If you haven’t heard of them I suggest you check them out on Facebook https://www.facebook.com/#!/Galvsport or the net http://www.galvsport.com/ really taking it to the next level for GTR’s and motorsport builds over here in WA.

Essentially I had a R32 GTST with a RB25 in it to compete in local motorsport, usual bolt ons etc delivering 375whp and this kept me happy for a brief period of time before the GTR bug bit, due to the plan from the get go being a built motor I found an example with a quality suspension and brake package with a popped motor and dropped it off to galvsport.

post-85139-0-62440400-1422324275_thumb.jpg

post-85139-0-72239900-1422324279_thumb.jpg

post-85139-0-20726400-1422324283_thumb.jpg

While awaiting its turn for Galvsport to start work, I had a Brad Stacey Weld in cage fitted, with the rear seat delete re-trim performed in house at Galvsport.

post-85139-0-70681800-1422324286_thumb.jpg

Also had the front dash and a few other interior bits and pieces flocked

post-85139-0-44175000-1422324290_thumb.jpg

Dropped, stripped, powder coates front and rear sub frame and re fitted with the Ikeya Formula gear that came with the car on the rear end, and Nismo gear for the front end.

Had the bay re-sprayed and a few other bits and pieces tidied up on the body

post-85139-0-49724700-1422324295_thumb.jpg

Scene missing, the motor assembled and dropped into place

post-85139-0-44999500-1422324302_thumb.jpg

post-85139-0-80205100-1422324312_thumb.jpg

Car drove off the Hoist last Friday and fired up first go, we will be getting some run in kms on it and a proper tune input for its first track outing early next week.

post-85139-0-29083500-1422324319_thumb.jpg

post-85139-0-49781600-1422324324_thumb.jpg

Cliff notes of the build:-

Brand New N1 Block

HKS 2.8 step 2 rotating assembly

HKS 272 cams and associated Valve train

Custom HKS cam covers made by GT Graphics

6 boost

Precision 6466 turbo

Flex fuel E85

ID2000’s

Aeromotive Eliminator pump

Speedflow lines

Getrag 6 speed box from R34 GTR

NPC Twin Plate clutch

Link G4+

Ikeya Formula rear end (not going to list it all to keep it brief, but you get the jist)

Nismo Front End (ditto)

AP Racing 4 spot front brakes

Project Mu Discs

2 x sparco Evo 3 seats

oh, also will be retaining a full functioning AC System - speedflow and galvsport can fix anything.

Thanks for reading and look forward to taking it to get some seat time at barbs and other local motorsport events ASAP.

Will update with results once it’s had its proper tune from All Star Garage.

I fail at getting pictures on SAU so as oppose to linked into the thread they are down the bottom.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/
Share on other sites

  • 1 month later...

Nice build mate, you must be stoked to finally have it back - makes great power clearly!

Any future plans for it or just keep as is for the time being and enjoy?

for the time being i will just keep it as it is, it has been nearly 2 years in the build and i want to enjoy it a bit and lay down some lap times. Maybe towards the end of the year look at doing some big boy alcon brakes and aftermarket diff setup. also needs a respray is currently 50 shades of grey.

What happened to the lm gt4s? Also the retrim looks quite good in the rear, nice job :) looking forward to more

swapped for XT7s

This thing looks unreal! Keep us posted with how she goes on the track.

was great, took it out to RAC for a tuning session, didnt die, didnt crash didnt break all in all a good day!

Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/#findComment-7490322
Share on other sites

http://www.wascc.com.au/Uploads/pdf/2015%20ALL%20EVENTS%20b.pdf

The March 5th, this Thursday, 9am to 4pm
Just needs cams license, If you never been to a tuning day, its very relaxed, and you go out when road cars are called.

No pressure, just a all day testing of your car, i believe its 30 minute sessions ( i forget ) and you get about 5 or so.

You can go out for 1 lap, comin, change stuff, then go straight back out again, one of the easiest track days you can goto.
No timing gear, so use ur phone.

Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/#findComment-7490371
Share on other sites

Ah yes, forgot about that.

If still interested, you can sign up for that on the day.

Racing Membership - $285

$50.00 for New Membership Joining Fee

This is our most popular membership allowing you to drive on Barbagallo Raceway

  • All the benefits of a Spectator Member PLUS:
  • FREE general admission to the V8 Supercars Championship round
  • Access to drive on the circuit in your Race car at club Tuning Days for a nominal fee
  • Participation in motor sport as a driver. (Additional CAMS competition licence fee applies)
  • Voting rights.
  • One FREE Race Tuning Day valued at $75 (not redeemable for cash)
  • Access to McCrackan House for all WA Sporting Car Club events
Edited by jay-rod
Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/#findComment-7490611
Share on other sites

  • 1 year later...
  • 4 months later...
On Saturday, 12 March 2016 at 3:43 PM, JH32 said:

hows this thing coming along man? getting some laps in?

"late response"

 

Essentially I got some decent laps in up until September last year, when I moved overseas for work, and sold everything but the car. However, have recently sent it back into galvsport to prepare it for Racewars 2017.

Cliff Notes:-

> Holinger Sequential

> new tune and will lean on it a touch harder for 8,250rpm as oppose to 7,500 running last year.

> will get it wrapped

> fit up the new wheels with fresh rubber for the event

> sort out the 4wd gremlin

> Rebuild the shocks which were starting to let go towards end of last year.

 

hoping to get a few days at rac and barbs in while back in Perth!

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/#findComment-7761685
Share on other sites

  • 1 year later...

Was just taking a trip down memory lane and researching bits and pieces for the next stage. 

 

Racewars is done and dusted and back over seas, got the HKS livery done and a few tweaks nothing too major. 

 

FB_IMG_1504434110860.jpg.3408349dc8ec3b8e8c69568e315b36f2.jpg

 

FB_IMG_1504434156464.jpg.fb619e66e5f4acba2de6c2c4e0b8280e.jpg

 

FB_IMG_1504434151025.thumb.jpg.30f5b45828e9b2ce1df87e6f1ce49f9e.jpg

 

FB_IMG_1504434145139.jpg.0ceeebd54896cefc51c359ecb860ab99.jpg

 

FB_IMG_1504434171832.thumb.jpg.2f8da6dcbb7b62eeaa4c94579764bb0e.jpg

 

FB_IMG_1504434188248.thumb.jpg.361e71ecaa5b8bef5c315028ff9f0d19.jpg

 

FB_IMG_1504434216154.jpg.b5f0c3d083f618059bfefd52e2ed1c69.jpg

 

FB_IMG_1504434208746.thumb.jpg.bf028a5a329bb8a0f5fa81519340d42f.jpg

 

 

 

Next stage really consists of prep for RW18 (nothing major), overhauling the interior (all the dry carbon) and prepping to for export to the UK (where i am currently living) 

Livery is coming off, basically going to All Black. 

 

Watch this space 

 

 

 

FB_IMG_1504434133947.jpg

  • Like 7
Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/#findComment-7847959
Share on other sites

  • 1 year later...

Well seems I don't pay too much attention to SAU as of late. 

 

Racewars 18 was run with a big improvement over last year thanks to a retune from WA Racing Developments. 

and the HKS was removed in favour of some fresh panel and paint, with new rims to follow.  Thanks to Panelhaus in Canningvale for the so far top job, should be off to Madinc in the near future to protect the paint and I might get to drive it this year.  

 

 

 

et.png

IMG_9547.jpg

IMG_9548.jpg

  • Like 4
Link to comment
https://www.sau.com.au/forums/topic/453145-wa-rb28-t/#findComment-7892125
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...