Jump to content
SAU Community

Recommended Posts

Hey guys.
So basically as the group says i would like to start a group dedicated to the purple BNR34 ( genuine only)

something simple like

Name (first name only, just for privacy )
State ( to see where the cars are and also to keep in contact with people from your with the same passion.
Photo of the car ( i am thinking no plates just for privacy, ultimately it is up to you )
and maybe even Modification ( not necessary but if you would like to share )

if admin approve , i would like to make it so you can sell your MNP parts only such as bumpers,guards and even the exclusive wheels that came out with them.

Link to comment
https://www.sau.com.au/forums/topic/453331-midnight-purple-bnr34-owners/
Share on other sites

Hey guys.

So basically as the group says i would like to start a group dedicated to the purple BNR34 ( genuine only)

something simple like

Name (first name only, just for privacy )

State ( to see where the cars are and also to keep in contact with people from your with the same passion.

Photo of the car ( i am thinking no plates just for privacy, ultimately it is up to you )

and maybe even Modification ( not necessary but if you would like to share )

if admin approve , i would like to make it so you can sell your MNP parts only such as bumpers,guards and even the exclusive wheels that came out with them.

I think it's a good idea.

The specific mnp bits were limited to mnp3 only ( wingblade, wheels and another 1 or 2 things that i can't remember right now). These parts rarely ever come up and if they do they don't last long. I've seen one or two sets of the genuine MNP3 wheels come up for sale, but i have never seen a genuine wingblade ( for sale in Aus). With that said, If I had a midnight purple two BNR34 I would be trying to source the MNP3 wheels and wingblade as that would look mad. I know a certain 34 N1 owner on here who has a set currently.... :whistling:

Thanks for the support mate.

If the wheels currently have brand new tires I am very keen (for compliance reasons )

Also ,as my other other post was very vague I thought I would re do it

Mark

SA

MNP2 v-spec

At the moment Iam unsure of mods

Of the top of my head it has

Nismo cooler piping

Nismo intake piping

And a few other things

Thanks for the support mate.

If the wheels currently have brand new tires I am very keen (for compliance reasons )

The mnp3 wheels don't belong to me, they are owned by another guy on this forum. I will link him to this thread.

MP2 is a great choice of colour by the way :thumbsup: .

The mnp3 wheels don't belong to me, they are owned by another guy on this forum. I will link him to this thread.

MP2 is a great choice of colour by the way :thumbsup: .

Sorry mate read it wrong.

If you could link him that would be much appreciated :)

Thanks mate , something different.

Don't know of any others in SA

Which was half the reason I started this forum ,hopefully I can find others .

Jason's reference:- Not selling just yet.

Terry-35_zps4480c0ef.jpg

But this is what they look like.

Terry-34_zps59647b6b.jpg

I think they look gorgeous, and they're well suited to the MNP colour. Did they come out in both MNP2 as well as MNP3?

  • Like 1

Nice. They only came on midnight purple 3.

It's surprising how many Midnight purple 3 cars are sold without them and without the wingblade. Perhaps the owners are thinking that if they hold on to them for a few years, they can charge a pretty penny.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...