Jump to content
SAU Community

18" G-max 2-piece Forged Enigma Wheels For Sale - Good Condition

nickperth
 Share

Recommended Posts

nickperth Collaborator

nickperth

Posted
Posted

Hi, I am selling a set of 18” G-Max Engima wheels in good condition, they recently came of a R34 GT-T, and these wheels are an 18” rim. The rears are rims are a 9.5” wide rim with a +35 Offset while the fronts are 8.5”rim with a +33 offset.

They are in really good condition and are 2 piece fully forged wheel, these are a very good quality set of rims and not made of cheap material, I never had any what so ever trouble with the wheels rubbing on the guards or on full lock, I bought them a couple years ago for $2300 new.

These wheels are in no way out of balance or buckled. These rims are a perfect fit for any skyline, however will fit other cars as well, plus they look great with a nice deep dish touch to it.

It shares a PCD Stud pattern of 114.3 X 5, the wheels comes with center caps.

Price is $1100 Negotiable

Wheels are located in Darch

Contact number is 0481-502-605 contact me any time.

post-66618-0-20946600-1422688398_thumb.jpg

post-66618-0-60937500-1422688430_thumb.jpg

post-66618-0-78372600-1422688647_thumb.jpg

post-66618-0-60036800-1422688817_thumb.jpg

post-66618-0-68090100-1422688929_thumb.jpg

post-66618-0-61275600-1422688960_thumb.jpg

post-66618-0-18463400-1422689027_thumb.jpg

post-66618-0-05654800-1422689147_thumb.jpg

post-66618-0-03813900-1422689196_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Pillowball/Hardened Runner Hybrid Approach

      By Duncan · Posted

      To add to that very useful summary, even in the race/rally r32 gtr I have good quality, new(ish) poly bushes everywhere because that is what rules require, and the handling is excellent. Of course, the car doesn't do many klm but I'd still expect poly bushes to last better in road use than sphericals (especially as I have a couple of klm of dirt road to stuff sphericals up) I would change the front upper arms to spherical if I was allowed to, because the poly bushes flog out often, but otherwise new bushes (and ball joints) and a good alignment can make a world of difference
    • joshuaho96
      ER34 AT ECU and HKS SLD pins

      By joshuaho96 · Posted

      Any chance you can get a Nistune board installed instead and set the speed limit to whatever your tires can handle?
    • GoHashiriya
      ER34 AT ECU and HKS SLD pins

      By GoHashiriya · Posted

      Hi all, I need to get this HKS SLD attached to my stock ECU because I've now got the German autobahn and faster European circuits to contend with.  The car is a manual 2dr ER34 with an AT ECU and I've realised the AT ECU has two pins for speed sensor signals: Pin 29: Vehicle speed sensor signal (Vehicle speed sensor 2) Pin *58: Output shaft rotation sensor signal (Vehicle speed sensor 1) - *RB25DET A/T model only Before I go butchering this harness, is anyone sure of which pin is the correct one for signal adjustment? The attached document from HKS indicates pin 29 but I found this situation mentioned in the following thread on a different forum (R34 GTT Auto Trans Speed Cut Problem | Zerotohundred) mentioning pin 58 needing to be altered by member zephuros, albeit it seems to be for an RSM-GP and the info appears to be old.  R34_All_Workshop_Manual-pages-2.pdf R34_All_Workshop_Manual-pages-3.pdf R34_All_Workshop_Manual-pages-1.pdf HKS SLD Vehicle Pin out P59-P70 ER34-pages.pdf
    • dyl33
      Creative in cabin amp locations

      By dyl33 · Posted

      Slimline sub on the rear parcel shelf is doable. Pioneer TS-WX140DA is only 70mm high.   
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      People like Johnny Dose Bro might be laughing at my post because I accidentally added 100mm to my numbers. 350-355 is indeed the lower limit. 450 is off-road Skyline spec.
×
×
  • Create New...