Jump to content
SAU Community

Recommended Posts

Hey guys

Looking for opinions on paint damage to the roof of my R32 GTR

The car was resprayed in the original colour in Japan and whilst a good finish, the roof has a few spots where there is damage to the paint, under the clear coat.

I have had a quote to respray the whole roof (removing all glass) and fix crazing on some plastics components for $2k. By the time i buy new trim pieces from nissan and pay to remove/refit glass it will be close to $3.5k

Sorry but to the point i was wondering if anyone is aware of any other options other then a full respray of the roof as its isolated to a few areas only. Im also not quite sure what paint damage it is.

Here are some pics:

post-15055-14231999838324_thumb.jpgpost-15055-1423200002098_thumb.jpg

Cheers Jase

Edited by gts25
Link to comment
https://www.sau.com.au/forums/topic/453566-opinions-on-r32-gtr-paint-damage/
Share on other sites

no real options, you cant get away with a fade out on a roof. if the job wasnt done properly and there is damage under the clear then its a strip back and repaint. if its not done properly then your gonna end up back in the same position

Haha I'm sure it won't be the last time you open your wallet for the GTR. Unfortunately most peoples wallets are continuously open while owning a GTR, including mine.

Just make sure the people fixing the paint strip it right back otherwise the problems might arise again in the future. Some shops will just scuff the paint back and spray over the top unfortunately.

  • 4 weeks later...

Hello! I don't think it can be fixed in other way than repainting. I had such problems with my car too. I had to repaint the whole roof. Then I applied a colour protector from colourshield, and everything has been OK with it so far. Hope, I will never have to do it again...

Edited by trevordd

I have been back to the panel beater and yep it needs to be resprayed. Roof is going to be stripped right back and resprayed, down the a pillars and the rear quarters. Whilst they have the car I am having all plastic components repsrayed (grille, N1 kit, mirrors, tail lights etc).

Job will be done properly and all glass will come out. The great thing about it is the windscreen guy they use is going to use a generic rubber over the edges and over the front and rear windscreens rather then me forking out $800 for the original trim kits. The screens will be removed, reinstalled and custom rubber install done for <$500

Will be done in the next few months..

  • 8 months later...

hey guys

to wrap this thread up properly, i had my car resprayed last week (roof, rear quarters with glass out and most plastic parts) and picked it up yesterday

it came out fantastic. heres a shot of the roof:

post-15055-14487945134986_thumb.jpg

as previously discussed a generic rubber was used out on the outside of the screens instead of the expensive nissan trims kits. in my opinion it looks just as good if not better then the multiple piece trim kit. all up to remove and reinstall glass with genuine inner clips and generic rubber was approx $500.

heres what the rubber looks like

post-15055-14487949191599_thumb.jpg

post-15055-14487949472575_thumb.jpg

post-15055-14487949943393_thumb.jpg

stoked with how the car came out

got the work done at johns twins in wollongong. cant speak highly enough of their work and customer service

terry - unfortunately i was interstate when the work was done so i didnt speak to the windscreen guy. the rubbers look to be of good quality

jase

Edited by gts25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...