Jump to content
SAU Community

Recommended Posts

Hey guys il be changing gearbox fluid soon. Il be using Castrol transmax Z in the Transfer case. I know this topic has been covered many times before. But i wanted to ask the R34 gtr owners (Getrag owners) what their thoughts and experiences are with both Castrol transmax z and Royal purple synchromax in the gearbox? Any differences between shifting smoothness etc.

I know how pricey and rare the Getrag's can be so call me fussy when i say id rather break 100 Rb26 motors than a Getrag gearbox :P haha

Edited by Levy

You can buy brand new Getrag/transfer case etc from nengun for $8.7k USD.

Try getting a brand new Rb26dett for that price.

In saying that use the fluid that Nissan recommends which is NISMO COMPETITION OIL type 2189E(75W140) 2L

Edited by Stixbnr32

You can buy brand new Getrag/transfer case etc from nengun for $8.7k USD.

Try getting a brand new Rb26dett for that price.

In saying that use the fluid that Nissan recommends which is NISMO COMPETITION OIL type 2189E(75W140) 2L

Good to know they still sell brand new. This is the first time i heard the Nismo oil. Il have to look into that. Thanks man

I use RP syncromax in mine, DO NOT UNDER ANY CIRCUMSTANCE use a gearbox additive in a Getrag

Try buying the Nismo oil and see how much it is :(

Would you recommend the RP synchromax? How many kms have you done with it?

I little over 10k and 5k of that is with 450+awkw including two trips to the drags, a day at SMSP-S and two hill climbs so far with two more at the end of this month

The RP Syncromax was designed for use in the Getrag, the Supra version which is nearly identical to the R34 one

I little over 10k and 5k of that is with 450+awkw including two trips to the drags, a day at SMSP-S and two hill climbs so far with two more at the end of this month

The RP Syncromax was designed for use in the Getrag, the Supra version which is nearly identical to the R34 one

Thanks for info. I think il give it the RP synchromax a go. Iv been using their engine oils for all my RBs without any problems. I guess there Gearbox oils should be just as good.

Used that RP stuff and made the box shit house to drive, before that it had the old oil it in from Japan and copped a hammering with 750hp.
Tried to be good to it and put the "good" oil in it and it was worse to drive.

Used that RP stuff and made the box shit house to drive, before that it had the old oil it in from Japan and copped a hammering with 750hp.

Tried to be good to it and put the "good" oil in it and it was worse to drive.

Way to kill my confidence i just bought 2 bottles today :unsure:

Il only be using it for the gearbox. Il be using Castrol transmax Z for the transfer case.

Sorry mate lol

See how you go I guess, we ended up getting the box rebuilt and synchros were rooted but gears were immaculate.

Well im not running no where near that sort of power lol Cars still standard. So what oil did you switch back to?

I have no issues with drivability with mine, it shifts perfectly fine

I use the RP stuff because when working the the BSM GTR team they had a group of oils tested after blowing a few boxes and the RP came back the best and they stopped losing boxes after changing to RP, though that was Gearmax in a PPG dog box

Post up how you go with the RP when you do it

If you want ideas on different oils look at the Supra sites, they have had the Getrag box a lot longer then us :thumbsup:

  • 3 weeks later...

Sorry about the late update guys. Finally ended up changing the the gearbox fluids. Already i noticed a big change in smoothness even while the gearbox is cold. Once its warmed up it just gets better. Before doing the change my gearbox felt pretty rough (no crunches). Especially at low speed shifts. Now it slips in beautifully :)

Like i said i ended up using Transmax z in the Transfer case and RP synchromax in the gearbox. Will see how long this smoothness last...

Edited by Levy
  • Like 1

That's good to hear :thumbsup:

I just did two days off hill climbs at bathurst :), and had a issue on the first run on the second day while box was still cold, it crunched going from 4th back to 3rd coming into the Cutting, after that the box had warmed up and was perfect

I was talking to the Supra owner that was there about oil and he too runs RP without issue but mentioned the Getrag was designed for Dextron II which is a mineral oil, not synthetic , but you can't buy that anymore as it was superseded by Dextron III

  • Like 1

If you follow the tread on the same subject further down you will se that Getrag say to use the Dextron II because the seals do not like modern synthetics

Poster there is buying Toyota T IV which presumably fits the bill.

  • 1 year later...

Just a quick update i havnt changed the the gearbox and tranfer oils since and have done roughly 10k. Its been through alot of hard street driving and occasional drags. And in the last 6 months iv been doing a fair bit of 2 step launches with the car making 340awkw. Gearbox hasnt had any issues since and still feels smooth at high and low rpms. Il be servicing soon and will be using the same oils

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • On 12th June, the mechanic could not figure out what the issue was, but the car seems to be flooding with fuel. He was suspecting the tune, thus referred me to a tuner. Although the tuner is not familiar with Nistune, last Monday (30th June), he came over to try and re-map it. Despite the tuner trying to completely stop fuel, it kept sounding like it was pushing fuel. Tuner ended up suspecting either the ECU or Injectors. I do not believe the ECU or Nistune is the issue, as the Nistune software reads and communicates properly. Today, I removed the (new) injectors to see if they are clogged or leaking. Surprisingly enough, after those 3 days of driving, injectors 2 and 3 look very blocked. You can see the difference in the picture. I blew a bit on 3, that is why it doesn't look as clogged as 2. I am still unsure if this is what is causing the no start issue, but I am now feeling that I may have bought the injectors and Nistune without the need to do so, as the problem seems to be coming from somewhere else.  
    • haha this shit box doesn't drink coolant, for now       Let me guess, they make heaps of power, use the car for straight line driving and don't care about noise
    • They’re so great that I know of someone pulling one out to go back to a sequential 
    • Hello everyone. I've recently started the research into R34 GTR front bits and running into eye watering prices. On the plus site it looks like some places make 'replacement' fender liners for these cars. At eye-watering-but-less than stock prices. I also noticed there's plenty of diffuser options available too. What I would like to know is if my following assumptions are correct. 1) The OEM guard liners are actually only 'half' the liner. They go together with the OEM brake vents which are a separate item which looks to be quite a large 'panel' that is part of the liner. The GTR bumper has bolt holes along the front. I assume the ones in the vent correspond to the ones the OEM liner does not have (circled?)   2) The V-Spec front diffuser supplants the brake ducts in the above item. I am assuming these still work with the guard liners as there's no alternate part that I'm aware of. I don't see how they go together, so I'm making the assumption that they have to, somehow. I know the center splash guard is different on the V-Spec (and is the price of the damn diffuser alone). How does the liner interact with this? 3) There's alternate front diffusers that do away with it all. Annoyingly, a lot of the clones and CF different ones... have no brake ducts on them. I like the idea of them though. My brakes get hot on the track. These alternate diffusers are a lot cheaper than plastic splash guards. I'm assuming you don't have to/aren't supposed to remove guard liners to run a diffuser. I suspect that quite a few people actually do not run the guard liner because with a front undertray you're getting a lot of 'splash' guarding anyway, and most people remove liners given they're probably running a pretty aggressive setup with a diffuser at the front. It would also be nice to know if anyone has ever run the 'reproduction' guard liners and know whether the fitment is OEM quality or "OEM Quality". Example: https://www.ebay.com.au/itm/356254671561 https://carbonetics.net/products/nissan-skyline-r34-gtr-plastic-front-wheel-arch-set Is this knowledge still around?
×
×
  • Create New...