Jump to content
SAU Community

Recommended Posts

Hiya all :cheers:

If you've seen the "Pushing a mostly stock R33" you'd know where this question comes from.

Anyway, I have an R33 Spec2 and would like to run ~2psi more boost and hold it properly. At the moment I have a GFB bleed valve controlling the boost level, but it bleeds off quite quickly after peak boost is reached - though I know that the Rb20DET turbos seem to run a couple psi higher boost than the RB25DET ones, so theoretically if I used the same boost control they do I should get similar boost behaviour - so wouldn't really need to rely on a bleed valve.

I can get an R32 RB20DET turbo for free, does anyone know if I can use the actuator/actuator spring with the RB25DET turbo? Any thing I should know?

Cheers in advance!

Dan.

Link to comment
https://www.sau.com.au/forums/topic/45390-r32-wastegate-actuator-on-r33-turbo/
Share on other sites

Can you get me an actuator free too??  Im willing too experiment.

Yes they are a straight bolt on.

Haha - I'd love to :) One of my friends blew his R32 RB20DET turbo recently, running ~18psi through it :headspin: This is how I am getting one so FREE, I just happened to think of it when I was pondering how to alter my boost actuation.

How long have you been running 13psi through your stock turbo??? Thats pretty up there...

12-13psi for a good 8 months or more and it gets its fair share of caining.

Im ringing around now to find a R32 actuator, apparently you can bend the rod to put more pressure on the spring.

Yeah, I know about that way around it - but I would rather not :)

  • 4 weeks later...
12-13psi for a good 8 months or more and it gets its fair share of caining.

Im ringing around now to find a R32 actuator, apparently you can bend the rod to put more pressure on the spring.

Update - I have an R32 GTSt actuator on my car now :cheers:

On "stock boost" I am running 10-11psi, seems to come on stronger - feels particularly meaty around 4000-4500rpm. I find it hard to tell if its any better up top, there is definately a LITTLE drop off in the high revs. It will be going on the dyno on the 21st August for a boost and power read out, to see what the difference (if any) really is :)

I bought a HKS actuator and yes still notice some drop off, not as severe though.

Ahh ok - so the R32 actuator is a good (price wise) alternative :cheers: The ultimate would be getting an electronic boost controller then, but the better actuator is going to make its life easier... when I eventually get that sorted.

So you are still getting drop off below 10.9psi?

10.9psi for myself is the stock boost level for the rb20det actuator.

To hold more boost I elongated the actuator bracket holes and pulled the wastegate towards the front of the engine bay.

This preloads the actuator spring and reduces the total travel of the actuator, effectively stopping the wastegate from opening as much.

The result.... boost comes on harder and will hold anywhere up to 1.1bar without a bleeder, if adjusted too much it will get boost creep and make 1.1+bar.

This setup works best with a bleeder to help bring boost up hard in the mid.

The RB20DET's are pretty tough and will hit a fuel cut before you blow the turbo (well mine does at just over 1.1bar). So You drive along with the spanner adjusting. Or you can do it on the Dyno which is much much safer.

I've had it running 1.1bar like this with a bleeder for the last 6 months.

Prior to this setup I was running a Blitz SBC-iD and 1.1bar.

Which one works better and holds boost more consistently?

The bodge job with the bleeder, the EBC held boost well but driving up a hill on load at around 3000rpm and putting the foot down would see a boost spike.

Its cheap.. A Free MOD!.

For the R33 people, I think the best thing to do is get one of these R32 actuators on your car, and then mod the factory bleed solinoid so it's on all the time (there's a DIY thread about doing this).

So you should get the (new) stock boost of 10psi with the R32 actuator, and have the factory solinoid bleeding off to bring it up by 2psi = 12psi :cheers:

Total cost would be just the R32 actuator, and you'd have the benefits of everything looking totally stock standard :)

J

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...