Jump to content
SAU Community

Recommended Posts

Hey guys!

when i bought my r32 gtst with rb25de it never had a charcoal canister, the vent line was simply capped off and i also noticed when you unscrew the fuel cap it never whiffed out air like its meant to and i always had a pretty strong fuel fume smell while driving no matter what windows up/windows down didn't seem to matter.. after a while i thought i would plumb it back in, bought the canister hooked it up correctly and tested it out over the next few weeks, the smell seemed to have gone but then when the windows where down it was stronger then ever...

about a year ago i replaced the fuel pump with a walbro and replaced the fuel lines from the tank to the hard lines and when i got the car i replaced from the hard lines to the filter and then to the rail.. but it still smelt


so i did some more research and found that they have a common leak area with in the compliance fuel restrictor, i pulled that out and found that the sealant they had used had perished, i re-sealed it with sickaflex and it still smelt..

so now bassicly I'm after advice on what steps to take next.. a lot of people have said to replace the o ring above the fuel pump but I'm almost certain that is sealed correctly as you can't smell anything in the boot...

the only thing i can think of it being is the filler neck itself or the vent lines from the tank... I'm pretty much at the stage that i want to drop the tank and replace everything... if anyone has any advice or ideas please let me know and thank you in advance!



post-120683-0-94272800-1426413525_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/454775-fuel-smell-while-driving/
Share on other sites

Leaky injectors ?

Does it have the PCV connected and works

Does it have a catch can and is that vented to the atmosphere

Is it just running rich. What is the AFR's

Do you smell it when its

- Idling

- Moving

- when it is off (then it's a leak)

I had the same issue with my r33 Gtst. I ended up prying out the fuel neck compliance thingy, cleaning it up and using sikaflex to create a nice new seal for it and refitting it. Now the fuel smell is gone and when I go to fill up at the servo you can hear the pssssshhh sound which would never happen before.

If that doesn't fix it then just replace the fuel pump o ring as its a cheap fix (might need replacing after you changed your fuel pump) this was the cause for my in cabin fuel smell when I had my S15.

What hose did you use when you replaced the lines? Some hoses are just prone to be stinky.

Charcoal canister hooked up correctly? When you say the vent line was capped off do you mean the vent for the fuel tank was closed/blocked off?

I'd replace the fuel pump o-ring, cheap, easy and quick to do, leave the guesswork out of it.

picking up a new oring tomorrow, ill fit it and see how i go,

yep cannister hooked up correctly as far as i can see, i compared it to a mates on
and yes the vent line coming from the tank had a bit of hose coming off with a screw in it hose clamped on


i put the car in the air last night, turned it on and got under couldn't smell or see anything...doesnt gel

I had the same issue with my r33 Gtst. I ended up prying out the fuel neck compliance thingy, cleaning it up and using sikaflex to create a nice new seal for it and refitting it. Now the fuel smell is gone and when I go to fill up at the servo you can hear the pssssshhh sound which would never happen before.

If that doesn't fix it then just replace the fuel pump o ring as its a cheap fix (might need replacing after you changed your fuel pump) this was the cause for my in cabin fuel smell when I had my S15.

most likely this.

heard of this plenty of times and usually is the filler neck leaking. Was the same on mine. I found this gives a really strong smell into the cabin as its so close to ur door.

Move your car out into the sun for a while and then when it is nice n warm go and sit in the drivers seat and look back thru ur wing mirror past the petrol filler port. you will probably see fumes coming out- I could before I fixed my filler neck.

If this doesn't fix it then look into where the lines are going to that used to be connected to the charcoal canister.

Edited by jjman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
×
×
  • Create New...