Jump to content
SAU Community

Recommended Posts

spaz moment, the 235/40 compared to the 45, this will increase spedo reading yes?

i know only by likr 3-4% but i have a 10% speedo error (always reading to high) anyway

Edited by GH05T

The higher profile will make the car go faster than the speedo is reading, so if your speedo currently reads higher than you're actually doing, it will correct this somewhat...but rather negligible as you say.

Let's not use confusing terms that could be interpreted differently.

Speedo runs off the gearbox output shaft, so it takes its reading based solely on engine rpm and the gear selected, irrespective of what's happening at the tyres and diff. Therefore, 2000rpm in 5th will always make the speedo read the same speed (say ~80km/h) no matter what size tyres or diff ratio you have.

Increase your tyre diameter and the vehicle physically goes faster but the speedo reading stays the same. So if your speedo reads high, putting on larger tyres will make it more accurate. If it reads low, putting on larger tyres will make it more inaccurate.

Manufacturers usually calibrate the speedo to the standard tyre diameter and make it read a little bit high so that they aren't responsible for people's speeding fines.

  • 2 weeks later...
  • 2 weeks later...

received the tires, unfortunately i stuffed up the tire speed calculation (yep did it backwards in my head....derp).
my speedo error reads to high already, the new diameter for my wheels means it will now read higher again not lower so they really dont suit which sucks.

still unfitted
which sucks cos the tread pattern looks so nice

re listed in sa :P

http://www.sau.com.au/forums/index.php?app=forums&module=post&section=post&do=new_post&f=12


Edited by GH05T

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...