Jump to content
SAU Community

Famous Tuning Shops Near Tokyo, Osaka, Tsukuba Or Ebisu


Recommended Posts

are there any near by these areas or accessible within 30 mins outside centre?

I will have a car to drive to Ebisu but the other places will just be by public transport, walking or bicycle.

any suggestions/recommendations of tuning houses and places to visit?

current list is Tsukuba & ebisu circuits, toyota museum, super auto bacs & up garages, plus a few more i cant think off th top of my head.

Will there be any car shows/events between mid October to early November?

Do they still hold car meets at that famous place off the wangan in the large parking lots? if so where is this place.

any input would be greatly appreciated.

  • 3 weeks later...

Hey there, I just got back from japan today so I can offer some advice with a few of those places. I wanted to experience more of the car scene but ran out of time. I would highly recommend the nismo factory in yokohama. opening hours are wed-sunday 10am-5pm free entry. parts are very pricey though but still an amazing experience and just under an hour by train from Tokyo train station. I checked out one upgarage in Tokyo but it wasn't that great. It was the one in minamitanaka, nerima, tokyo. it had 2 levels...the first with lots of good quality super cheap rims and the second floor with mainly head units, exhaust systems and coilovers, but not a lot of options for skylines. It might be worth checking out some other up garages though. I also went to an Autobacs in Osaka. It was the deiribashiten store and only a very short trip from Osaka train station. Not worth going to in my opinion, they only had car cleaning products and focused on interior parts and a decent selection of rims. The super Autobacs would be worth checking out though. Hope this helps you

  • Like 1

There is a good up garage near Tomei, close to the Tomei express way in yokohama that had a lot of skyline and gtr parts when I was there in may 2014. Im heading back to Japan in may this year, so I will update soon. They had quite a few R33 and R34 gtr for sale at the yard across the road.

  • Like 1

if you wanna ogle parts, your super Autobacs type stores are a time waste, as mentioned they only really do accessories these days; cleaners,rims, car audio etc.

For parts your up garages and Autobacs secohan (second hand) will at least have actual performance parts in them, even if they are used. People buy through the net or their tuner these days. In fact last trip I got a Blitz intercooler sent to my hotel COD and took it back on the plane with me. Saved about half the aus price, but took planning

  • Like 1

Sounds good. If you were to buy new, just keep in mind the resellers you buy from will probably not actually stock them, rather they will order from the manufacturer, then ship to you. So my intercooler I called and ordered on day one, but it only just made it to the hotel in time before I came back home (8 day trip?) so I almost lost out. Upgarage etc web pages are great in that they will ship fairly fast to you from whatever shop in japan has that item, but if you haven't been in person before, go out to the nearest one anyway, its grat to just wonder round them.

  • 1 month later...

Dori34,the upgarage in Machida,Yokohama isn't worth the trip out. Its full of just wheels and alot of junk now. So were the ones in Hiroshima,central Osaka.

Even using their website croooober.com,didn't show alot of gtr parts.

The Nismo headquarters in Yokohama was awesome though!! They have the R35 gt3 car that won the Bathurst 12 hour on display,still had racegas smells in the cabin!

Just got back from Japan and did a trip to the Machida Up Garage GT store and it wasn't really worth the visit.

Nismo headquarters is definitely a must visit! Current line up Datsun Sunny, Xanavi R34, R35 and IDX.

  • Like 1

No didn't get a chance to check it out! :( sounds good though! Will have to chuck it on the bucket list for next time!

I was lucky to check out omori! Went on a Tuesday not realising they recently changed their shop opening times...only managed to sneak in a visit just before I flew home the next day!!

  • 3 weeks later...
  • 3 weeks later...

Yes!

D1 event is on when i;m there in the Tokyo Bay area, so definitely going to that.

Has anyone done the R35 GTR drive hire in Japan? pricing seems reasonable for 24hr car hire with 400km limit, highly considering it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...