Jump to content
SAU Community

Recommended Posts

My R34 GTT project goals have changed, from fast / responsive street car to dedicated track car. As a result I'm now selling the new complete turbo kit I had originally bought for it. It includes:

Garrett GTX3071R turbo

Genuine Garrett 5 bolt 0.82 a/r rear housing, IWG

Garrett 14psi wastegate actuator

Spacer plate to fit to OEM exhaust manifold

Turbo nuts and studs

All water and oil lines (braided)

All other required fittings - banjo bolts, crush washers etc.

All required gaskets

Compressor outlet silicon elbow

Dump pipe to suit turbo, ceramic coated

It comes with EVERYTHING needed to bolt straight up to an RB25. I bought the whole kit through Kudos Motorsports, and they obviously sourced it through GCG Turbos in Australia. I had test fitted the turbo to the exhaust manifold, but nothing has been run and the turbo is still as new.

Fellow forum member Mick_o made a responsive 335rwkw from memory (on E85) with the same turbo in his R33.

The whole kit cost me about $3k, and then I spent extra changing the oil and water lines to braided items and getting the dump pipe ceramic coated. I'm looking to get $2,100 for the whole kit, plus delivery.

Cheers

Justin

post-31977-0-43606600-1428038252_thumb.jpg

post-31977-0-46883400-1428038289_thumb.jpg

post-31977-0-07529800-1428038299_thumb.jpg

post-31977-0-77794700-1428038309_thumb.jpg

post-31977-0-95164700-1428038318_thumb.jpg

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
    • Yep four point harness. Mounted to a bolted in brace running behind the seats. Dont use it for daily driving tbh but good to have for when its needed plus it looks cool.
    • I had to double check the thread title r34 gtt offset advice lol. Thought maybe i posted on the wrong thread. 😂
×
×
  • Create New...