Jump to content
SAU Community

Recommended Posts

Replaced my harmonic crank pulley and belt ect along with the cam and crank seals. The old crank pulley is the same nissan standard with 3 markings. | | | like this.

I'm having trouble finding info on what the markings are to check against timing light. All I can find is R34 markings which has 7 markings.

Is there and Stagea neo triptronic info with the correct markings settings out there ?

Well I just checked my Stagea Service manual and it shows the same markings as in the DIY section at the top of this page

http://www.sau.com.au/forums/topic/73824-adj-camshaft-pulley-new-cam-belt/

i.e. 7 marks from TDC to 30deg BTDC in 5 deg increments.

Does your new balancer have no markings? Would have been good to put some on with e.g. a protractor before you installed it.

If you have no idea of what the markings are hopefully you can assume one is TDC and then you can calculate what the others are from the circumference of the balancer.

It's has 3 markings same as the one replaced. Nissan supplied it from Japan in a nissan box against my chassis number

Markings are like | | |

OK well you can use the old one to measure if you know where TDC is.

Either use a protractor to find out what the other two are or measure the circumference and divide by 36 to get 10deg increments or by 72 to get 5deg increments.

Two more ideas - you could ask your question in the forced induction section

or you could email Nissan -apparently they do respond to questions.

They do reply and quickly.

When getting a "High powered exemption" for my son, a copy of what is on the web was knocked back by DMT. I emailed Nissan and got the info back on a Nissan letterhead.. Took two days and solved the problem.

Two more ideas - you could ask your question in the forced induction section

or you could email Nissan -apparently they do respond to questions.

Thanks KiwiRS4T, I emailed Nissan Japan and they sent me the above pictures, but apologised for the lack of translation.

If you are real worried, an extremely rough translation is;

Set timing to TDC

Idle car at 600rpm and check with a timing light and it should be set at 10deg +/- 2deg

I'm all sorted mate no worries, it's what I had worked out myself. I just couldn't find info to back my findings/ideas.

It was the bit where 1999 in brackets and 3 lines Japanese writing I was wondering about.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...