Jump to content
SAU Community

Recommended Posts

1 minute ago, Manne said:

my store isn't gopher friendly, ahahaha. 

since they damaged your knee they better make it gopher friendly

 

if they dont lets do an SAUWA gopher cruise thru the shop :)

  • Like 1
Just now, Manne said:

Yeah, I took it for a spirited drive for about 45 minutes today, normally it'd drip all night, so far just 1 drop.

wow the seal must have looked damaged if it leaked that bad huh?

Just now, Manne said:

Yep, the seals that go under the screws were about as flat as a 20c coin... 

those seals dont look new for long. 

 

mine cracked up and looked old within a year of replacing. 

  • Like 1
yeah i struggled to get up big time this morning
 
what was your best pass last night? got a timeslip?

DSC_0346.JPGDSC_0345.JPGDSC_0344.JPGworst thing is my first pass was the quickest but the take-off felt slower. Reaction times were gay. Will get under the rear this w/end and check all the bushes gearbox mounts and see if there is any play in the diff. Hope I dint hurt my sweetheart. It tramped really really bad on one run. So fingers crossed. If I can get the tramping sorted and tyres figured out with maybe a better driver? Haha
  • Like 1
super GT next weekend 
 
will have to watch the replay as im working:(

Yeah that work gets in the way of everything. First time we have been busy in ages so pretty happy to be busy again. The bristles were starting to wear low on the brooms and need replacement.
  • Like 1

DSC_0346.JPG.3e0ff52d23347f3bb9a3018190fd70b0.JPGDSC_0345.JPG.16f79f2711733cdeb4f87c154664219e.JPGDSC_0344.JPG.b996473c3f9b6464bbaa76c743201d20.JPGworst thing is my first pass was the quickest but the take-off felt slower. Reaction times were gay. Will get under the rear this w/end and check all the bushes gearbox mounts and see if there is any play in the diff. Hope I dint hurt my sweetheart. It tramped really really bad on one run. So fingers crossed. If I can get the tramping sorted and tyres figured out with maybe a better driver? Haha

Even worse than that upon reviewing the time sheets my best run has the wrong racing number so it wast me. Haha noobilishious. What a geek.
15 minutes ago, Beyond Blue R33 said:


Even worse than that upon reviewing the time sheets my best run has the wrong racing number so it wast me. Haha noobilishious. What a geek.

Can u get a better pic of the track conditions? Interested if ur drop in times co-insides with a drop in track temp

Can u get a better pic of the track conditions? Interested if ur drop in times co-insides with a drop in track temp

DSC_0348.JPGDSC_0347.JPGthe earlier time was the faster. Dropped it to 30 psi all round today. Do you think the duramax 75-90 is the right oil for the diff? It was juddering bad when I changed it then came good with the l.s.d. Paste and figure of 8's? The tein basics have only height adjustment and the ride is hard as since I lifted I't?

Yeah that work gets in the way of everything. First time we have been busy in ages so pretty happy to be busy again. The bristles were starting to wear low on the brooms and need replacement.

How good is Suzuka now that's racing. Would have been a train wreck in supercars!
kind of, on top of shitty working hours and days, on Wednesdays I have training, to help manage my knee problems.

I have to go to the pool at least 3 times a week for the back. I normally do excersize and stretches in the hot hydro pool then go to the 25m pool for walking and swimming laps. I've got dodgy knees too and if I walk too much in the pool they ache real bad but it's only Austio arthritis. I was in and out of physiotherapy for years and just pissed it all off did a load of research and found a balance that works good for me. What is the main problem with the knees?



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...