Jump to content
SAU Community

Recommended Posts

Thanks.



I half expected it to fall. I needed 3 arms so something had to balance but it slipped and got me.

Nearly done, fire is installed but need to fit the last length of flue and seal up the gland on the roof
Would assume it's 0.7 s/s crimped and swaged. I put a 1/2 inch thick flange in the roof split it down the centre and mounted it off the rafters so the top section of the flue had a mounting base to support the weight off the gyprock then a lead flashing on the roof under the tiles externally and 1/2" needle felt glass to insulate the heat from the gyprock under the flange inside. What you've done sounds great with the ventilation around the base and sides. Animal d.i.y. Show us your massive manifold and n/a exhaust.
  • Like 1

Well im home.....

Ran a 14.4@161kmh. Car just lays over at the top end so people just drive round me. I get out the hole fast but they run me down. Damn stock ecu and turbo lol.

Staging lanes were rammed and people cueing out the lane gates, and didnt reli wanna wait a hour to get another run

  • Like 2
Well im home.....
Ran a 14.4@161kmh. Car just lays over at the top end so people just drive round me. I get out the hole fast but they run me down. Damn stock ecu and turbo lol.
Staging lanes were rammed and people cueing out the lane gates, and didnt reli wanna wait a hour to get another run

At least you can lauch it! I was crap out the holeshot and had to run everyone down. There were bugger all cars there last week on skyline night so got 5 runs in. Would be a worry to cane it with a fully cold drive train. Xy gtho, charger 6 pack and monaros all ran 14.4 stock from the factory. Pretty good at under half the litres. Show us your Nissan! Well done mate!

At least you can lauch it! I was crap out the holeshot and had to run everyone down. There were bugger all cars there last week on skyline night so got 5 runs in. Would be a worry to cane it with a fully cold drive train. Xy gtho, charger 6 pack and monaros all ran 14.4 stock from the factory. Pretty good at under half the litres. Show us your Nissan! Well done mate!

Did u have to hit 5th gear? I was about 6500rpm in 4th over the line?
3 hours ago, t_revz said:

@Manne 

@z00key

coming to perth friday Guise. prob get there around 11 xox

I won't be at work on Friday.

1 hour ago, Beyond Blue R33 said:


If you check out the rear muffler you want on the magnaflow website I can get you a price on the part number. From super cat converters in Wangara. Will have all the dimensions there. Easiest way would be to measure what you have find one that's similar and has a I/d inlet on it slot it and use a accuseal clamp. You would only have to relocate the rear hanger bracket then?

i'll take a look, but I really don't know shit about my exhaust.

i watched WM on youtube. there is 26 x 22minute episodes plus there is a movie
 
i enjoyed the series more than i expected. initial D was better but its still very good. the movie isnt bad from memory either

Started watching the Wangan. Ghost-z lol. Way better than foxtel or tele though!
  • Like 1
25 minutes ago, Beyond Blue R33 said:


At least you can lauch it! I was crap out the holeshot and had to run everyone down. There were bugger all cars there last week on skyline night so got 5 runs in. Would be a worry to cane it with a fully cold drive train. Xy gtho, charger 6 pack and monaros all ran 14.4 stock from the factory. Pretty good at under half the litres. Show us your Nissan! Well done mate!

Cheers, i woulda went last week bit football is my only real form of exercise lol getting it going was easy, 2.0 to the 60ft. Its not slow by any means, jist that top end lay over.

The things i'd do for a 240z.... 

My mate Daniel had one about 20 yrs ago was a sweet ride 2.4 bored to 2.6 with side drafts. Black and original. He swapped it for a cbr and a few grand cash. He wishes he had a time machiene!
Is hank away or something?
Also, any brake rotors and pads recommendation? Looking at DBA T3 slotted for fronts and T2 slotted for rears or Dixcel SD/HS (but HS is so expensive).
Pads Project Mu Bspec to go with Dixcel or Red Stuff to go with DBAs
Thoughts?

I got
Alcon advantage extreme big brake kit front/rear
6 piston monobloc calipers 365x32mm 2 piece rotors
4 piston monobloc calipers 350x32mm 2 piece rotors paired Alcon Brake pads

makes 180 back to 60kmh faster than what u get up to with max boost.
Puts a smile on everyone when thay back to normal in a flash literary i reckon 2sec
Washed the car too not much dust but whatever was there easy to clean .
Cheers, i woulda went last week bit football is my only real form of exercise lol getting it going was easy, 2.0 to the 60ft. Its not slow by any means, jist that top end lay over.


I remember thinking my car was so quick when it was stock.
  • Like 1


Agh scrap that, realised its raining tomorrow. I have to get this flue connected today before the rain.

Might come next week. I'll keep in touch

All good bruv. Jump on jb website to have a look at the dishwashers on there and can let u know prices and availability



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...