Jump to content
SAU Community

Recommended Posts

13 hours ago, Beyond Blue R33 said:

Thought I had died but only fell asleep watching the welding arc. What's the new job dale?

Well YOU wouldnt let me have a crack at your drawings, so I decided to find someone who will :D

Funny thing is, I decided to try and go back to designing, and had my spine immediately shit itself and flop me into a surgery with little to no warning. Turns out, that exact same day my name popped up in a conversation between some old colleagues, and they rang the Good Wife to get me to attend an interview.

When the mrs told them I was currently opened up like Skywakers Tauntaun on Hoth they said they were THAT fkn keen they would see me any time I was ready (?) so I decided (while still off chops on meds in hospital) that I only needed 1 week to get over spinal fusion and I was bang up for it, and now tomorrow morning I will be in my best shiny bum costume in the cbd...

  • Like 1
On 12/5/2017 at 2:45 PM, Stinky Rooster said:

oh lawd, and so it begins...

 

 

...Murica'

You know it moite!

Talking to multiple people trying to source a car, this is the latest offering, but it's about $3k USD over budget. It does have the later 6.5L engine though.

Car is in Arizona, only one state over from Cali.

m998(1).jpg

m998(2).jpg

  • Like 3

Hank - all it needs is a confederate flag on the roof, and twin 10' stacks = sorted

 

Tits - Yup. Lost a bit of weight since the old days so I doubt the old ones will fit. And nobody wants to see loose fitting arseless chaps

 

no one

 

  • Like 1
25 minutes ago, Stinky Rooster said:

Hank - all it needs is a confederate flag on the roof, and twin 10' stacks = sorted

Deep water fording kit! Hank would fkn love it!

HMMWV_deep_water_fording_training-300x20

Well YOU wouldnt let me have a crack at your drawings, so I decided to find someone who will [emoji3]
Funny thing is, I decided to try and go back to designing, and had my spine immediately shit itself and flop me into a surgery with little to no warning. Turns out, that exact same day my name popped up in a conversation between some old colleagues, and they rang the Good Wife to get me to attend an interview.
When the mrs told them I was currently opened up like Skywakers Tauntaun on Hoth they said they were THAT fkn keen they would see me any time I was ready (?) so I decided (while still off chops on meds in hospital) that I only needed 1 week to get over spinal fusion and I was bang up for it, and now tomorrow morning I will be in my best shiny bum costume in the cbd...
Sorted. Beep,beep,beep reversing in the door. First impressions.images (3).jpegimages (2).jpeg
  • Like 2
  • Haha 1

Skyline has gone to its new home ? gd news its going to live on! The guys got a rough shell the same colour that hes gonna huse the front end off to repair mine as the bodys in much better nick!

  • Like 2
Skyline has gone to its new home [emoji17] gd news its going to live on! The guys got a rough shell the same colour that hes gonna huse the front end off to repair mine as the bodys in much better nick!



?‍♂️ x

Friyay ! Morning everyone ?[emoji485]
  • Like 2



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...