Jump to content
SAU Community

Recommended Posts

Paging Trev to WT
 
Need a translation before I add this to the collection plzkthnxbai
 
 
5a80fed715e40_IMG_20180212_1037171.thumb.jpg.9e0162d45ee3a010f4b7ab68cb3d413f.jpg


Maybe you could ask sanae how vaccume docking station would be spelt, then by the magic of photoshop you could still live the dream?


Who would have thought a bike muffler wouldn't result in a sporty sounding bobcat? It seemed like such a foregone conclusion.
Yeah I would have thought it would sound cool. Length to internal diameter ratio on straight through absorption mufflers. The longer and thicker the absorption material Is the more high end frequency it will remove. We normally use 1/4" or 1/8" holes perforated sheet with a s/s mesh to stop it blowing the packing out. Can get you a magnaflow at cost if you want. The louder the better on bobcat:-) just enough to impede the headphones and spiders.


Friend had a SSS pulsar with a u13 bluebird engine (fwd sr20det) in it back in the mid 2000s, it would pull on tuned ls1 commodores of the day.
Never underestimate a Nissan with 3 s's dads mate bought a bluebird SSS years ago. The engine went hard for a n/a 4pot.
Nah mate, I'll just pick up the wheel tomorrow (I worked the last 5 days and couldn't anyway)
Yeah mate. Damn work is crazy atm. We finally got our new bender sorted. Or I bloody did. Want to make Nissan bits but exhausted. Someday :-)
She'll do it for you. Go the yellow beast.


Fired straight up. Changed oil n filter, scraped an inch of dust off the front window then drove it to the car wash for a birthday

spider webs hanging on

  • Like 1
Yeah I would have thought it would sound cool. Length to internal diameter ratio on straight through absorption mufflers. The longer and thicker the absorption material Is the more high end frequency it will remove. We normally use 1/4" or 1/8" holes perforated sheet with a s/s mesh to stop it blowing the packing out. Can get you a magnaflow at cost if you want. The louder the better on bobcat:-) just enough to impede the headphones and spiders.


The hydraulics are engine noise are loud so the exhaust is now inaudible.

I’m just happy it’s blowing away from me so I don’t get smoked out driving it
  • Like 1


The hydraulics are engine noise are loud so the exhaust is now inaudible.

I’m just happy it’s blowing away from me so I don’t get smoked out driving it
Broom broom moar power. Moar noise. Shifting the earth again. Animal :-)


Yes, it’s all awesome my bro and I used to do 2 x 100km loops every weekend there, so much fun!!
Haha The Shoeys just being animals behind the bars or wheels for fun every weekend. Awesomeness ;-)
  • Like 1
2 hours ago, Beyond Blue R33 said:

Can get you a magnaflow at cost if you want

orly? 

You have my attention. Been sidetracked with the new front end, forgot I still need a zorst

  • Like 1


Fired straight up. Changed oil n filter, scraped an inch of dust off the front window then drove it to the car wash for a birthday

spider webs hanging on

Bit of fuel past the rings is bugger all. She loves you and can't understand why you pulled the methanol injection and put it on a diesel ute. Probably just jealous. You know what Japanese Girls are like. Low km's one owner. Don't you dare cross me>:)
orly? 
You have my attention. Been sidetracked with the new front end, forgot I still need a zorst
Yeah dale I can get the magnaflows at cost no probs from super cat converters in Wangara. Is a quality product I put them on my skyline and sounds good.
Yeah dale I can get the magnaflows at cost no probs from super cat converters in Wangara. Is a quality product I put them on my skyline and sounds good.
I put these 3" magnaflows on the Nissan exhaust when I built it. What diameter would ragnor need? [emoji23] DSC_0217.JPGDSC_0182_1.JPGDSC_0216.JPG

well, the std pipe is a fkn wierd bit of kit with a massive traingular box section hanging off the back of the muffler - there to keep it flat at the back for the pillion I assume, but that is no longer an issue, so

I am thinking about 350-400mm in length, need to have an inlet to take 1 3/4' pipe. Gotta have a nice thick casing, as its going to have lugs welded direct to the case

orly? 
You have my attention. Been sidetracked with the new front end, forgot I still need a zorst
This is s 2 1/2" we put on little yanmars at work. If you get on the magnaflow website and get the part no. You want. No probs. DSC_0122_3.JPG



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...