Jump to content
SAU Community

Powerhouse Racing Dual In Tank Setup

arsnic_apple
 Share

Recommended Posts

arsnic_apple Enthusiast

arsnic_apple

Posted
Posted

Hey guys,

Recently just purchased a powerhouse racing dual in tank fuel hat for my 32 gtr. Before ordering it I asked them of it'd work with the factory fuel gauge and they said yes. I've now received the fuel hat and cannot see how it is going to work with the sender, has anyone else installed a similar setup and got the factory fuel gauge sender setup. I know powertune were doing a similar setup at one stage if anyone has used one of those.

Cheers

arsnic_apple Enthusiast

arsnic_apple

Posted
  • Author
Posted

This is it here http://www.powerhouseracing.com/p-4597-phr-fuel-hat-for-nissan-240sx-s14-skyline-r33-r34.aspx

Im thinking that normal R32 must be different to GTR and they didnt know this because 32R's havent been legal there for very long and therefore didnt know any better?

  • 5 months later...
SiR_RB Grand Master

SiR_RB

Posted
Posted

bumping this thread...

has anyone had this issue with the powerhouse racing R32 lid, I'm ready to buy one but by the looks of it in the pics, sender wont attach to it?

any input from guys who have used it would be great

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

won't work with R32 or S13, will work with S14/15 R33/34

Better off getting an AI surge tank Mike, like this one:

http://www.aftermarketindustries.com.au/surge-tank-kits--accessories-c1/-surge-tank-sp800-p212/

Run your Walbro E85 pump in that, and get a smaller pump for the tank (lift).

Even with dual in-tank pumps on a R32/S13 style fuel tank you'll still have surge issues if you generate enough G-Force around a corner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...