Jump to content
SAU Community

Recommended Posts

True...

Op should run 6 inch piping for efficiency.

Obvious sarcasm aside, there is a point (size) where it won't help anymore.

Put a pressure gauge at the outlet of the turbo and one on the plenum, the differential pressure is the pressure drop through the pipe work. Then do it again with the upgrade.

So it wouldnt be the intercooler giving the pressure drop at all?

Yes of course.

Put simply, the least number of bends, shortest length and optimized pipe diameter will be best.

If your turbocharger is compressing the air to 30psi (example) you don't want it to be loosing 5-10psi through pipe work to get it into the cylinder head.

Can't help you with the decision of what plenum to run, but when I fitted my RB26/30 with a Greddy plenum I struck the usual/know problem of the clutch master hitting it.

I got a race car CNC guy to whip me up a spacer to allow me to run a S15 turbo, and have sold quite a few of these to forum members, let me know if you want one

ClutchMaster.jpg

Yes of course.

Put simply, the least number of bends, shortest length and optimized pipe diameter will be best.

If your turbocharger is compressing the air to 30psi (example) you don't want it to be loosing 5-10psi through pipe work to get it into the cylinder head.

You seriously think you will lose 10psi through 80mm pipework at this power? No chance.

Some people just want it to look like they have a 2000hp drag car, and this I can totally understand. I just prefer finding out if the stock gear can get the job done before blowing 1000's on overnight parts from Japan, and I am confident it will in this situation.

The same can't be said about exhausts, these need to be as you mentioned, least amount of bends, largest free flowing pipes you can fit. Same with intakes really if you don't have to worry about defects.

  • Like 1

You seriously think you will lose 10psi through 80mm pipework at this power? No chance.

Some people just want it to look like they have a 2000hp drag car, and this I can totally understand. I just prefer finding out if the stock gear can get the job done before blowing 1000's on overnight parts from Japan, and I am confident it will in this situation.

The same can't be said about exhausts, these need to be as you mentioned, least amount of bends, largest free flowing pipes you can fit. Same with intakes really if you don't have to worry about defects.

It is just an example, get your mate to put a couple of pressure gauges at the turbo outlet and at the plenum on his 600kW RB with stock pipe work and lets find out :)

Yep, some people like the look, others (like me) would prefer to look for every efficiency they can especially if they are building a turbo system with all custom piping anyway.

Fair enough. I have designed and fabricated pipework on many high horsepower builds, and there are a lot of good reasons to keep the airspeed up. If you want to slow it down as much as possible, who am I to judge.

Just letting OP know the GTR runs one of the best intercooler pipe setups I have seen on a stock car, and it's capable of 600+kw in my opinion, as long as high boost is involved.

As for pressure gauges, it isn't telling you much about the pipework, only how well the intercooler flows and if it's cooling the charge nicely. Pressure readings mean nothing without temperature drop.

Fair enough. I have designed and fabricated pipework on many high horsepower builds, and there are a lot of good reasons to keep the airspeed up. If you want to slow it down as much as possible, who am I to judge.

Just letting OP know the GTR runs one of the best intercooler pipe setups I have seen on a stock car, and it's capable of 600+kw in my opinion, as long as high boost is involved.

As for pressure gauges, it isn't telling you much about the pipework, only how well the intercooler flows and if it's cooling the charge nicely. Pressure readings mean nothing without temperature drop.

I agree it is capable of 600kW of flow... but that's about it from your comments.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...