What Are These Injectors?

[mr_rbman]

Pulled these injectors out of my R32 GTR.

Done a bit of a search with the part number and all I seem to be able to come up with is that they are standard but I didn't believe standard GTR injectors were this colour?!

Part number I've found is:

9A21 on one side and

1001-87097 on the other side.

Edited June 24, 2015 by mr_rbman

[Hadouken]

http://www.sau.com.au/forums/topic/245768-got-my-nismo-600cc-injectors-for-my-r32-gtr-yesterday/

[mr_rbman]

cheers.........but the part numbers don't seem to line up.

[STATUS]

they are sard 650 cc low impedance 100% which are just a re-branded oem item you have listed the OEM DENSO numbers.

[mr_rbman]

Cheers status.

Is there any reason why these wouldn't fit the standard 32 GTR fuel rail with standard fuel pressure regulator?

Reason I ask is the guy I bought the car off said he had to purchase a Sard fuel rail so that these would operate correctly which doesn't seem right?

I'd like to keep these if they'll be fine with the standard fuel rail etc...........

[STATUS]

just check the top diameter they might be to large to fit in std rail.

[Sub Boy32]

The factory fuel rail has a 10.5mm hole for the injectors, where as most aftermarket injectors and rails are a 11mm ones, some injectors can be jammed into the factory rail......some the top of the injector is too wide to fit

[mr_rbman]

ah ok, makes a bit more sense now.

Presume there's a way though you can adapt to suit/fit these injectors to fit to standard rail...

Basically just want to pop the bonnet and it looks standard.

[Hadouken]

Drill out standard rail

[mr_rbman]

perfect, cheers guys.