Jump to content
SAU Community

Recommended Posts

Provided your car already has a rear ARB, then yes, you can fit them. There's no real difference in the suspension arms (and hence mounting points for ARBs) between any of the R33s and R34s (ignoring the annoying differences in rear damper mounts).

Also, I expect that if you put a 20 on the front and a 24 on the rear that you will created something quite tailhappy and won't enjoy it.

The R34 doesn't have a rear ARB (but it does have the holes for one) meaning you can fit the stock one.

Note, you do need a couple of brackets that the stock car has to fit the whiteline items. The R34 N/A won't have them but the GTT/GTST "D brackets" will bolt onto the car, enabling you to use the whiteline items.

Provided your car already has a rear ARB, then yes, you can fit them. There's no real difference in the suspension arms (and hence mounting points for ARBs) between any of the R33s and R34s (ignoring the annoying differences in rear damper mounts).

Also, I expect that if you put a 20 on the front and a 24 on the rear that you will created something quite tailhappy and won't enjoy it.

Who doesn't enjoy tail happy?

and if his rears are adjustable cant he adjust them if it is too "tail happy"??

There's a difference between tail-happy-fun and tail-happy-trying-to-kill-you. The latter is actually not enjoyable, and it is substantially slower around bends too.

And no, a 24mm adjustable bar is much much stiffer than a 20. So the adjustment range available is nowhere near enough to dial out the trying-to-kill you. Most people would run a 24 on the front and a 22 at the rear, with whatever adjustability they want/can afford. Note that that is the OTHER way around from your idea. I myself put 24mm adjustables on both ends as I absolutely detest understeer and don't mind an active rear end. I have them set to stiffest@front and softest@rear and it is actually a little bit too lively at the rear. A 22mm adjustable set stiff at the rear would probably be just about right.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...