Jump to content
SAU Community

Recommended Posts

For Sale:

GTiR PowerFC with commander (hand controller) - plug included

$850 SOLD

IMAG0590_zps6knlxalm.jpg

IMAG0593_zpscszloe7v.jpg

IMAG0592_zpseoli9zmn.jpg

IMAG0591_zpskehi2ynb.jpg

IMAG0589_zpsvkinxrnd.jpg

new belts - $15 each
(6PK1175, 5PK0840, 5PK0825, 4PK955, 4PK860, 4PK855, 4PK775)

GTiR turbo manifold - SOLD
2x NEW OEM SR20 PCV valves - $15 each
N14/15 Whiteline rear swaybar end links w/ bushes (used but good condition) - $40
FWD SR20Distributor cap (not much oxidisation) - $30
SSS 15/16" master cylinder - $30
N15 ABS unit and relays - $20
Timing chain (off GTiR) - $20
SR20 water pump pulley - $15
16x GTiR retainers - $20 for all
1x GTiR cam gear - $10
N15 ECU plastic cover/enclosure thing - $10

Rocker cover gasket (used) + spark plug O-rings (new) - $30
Valve steam seals (exhaust & intake, new) - $40
Intake gaskets (from GTiR, might fit others) - $20 each
2x graphite exhaust gaskets - $10 each
Various turbo gaskets - $10 each for metal, $5 each for others
Graphite head gasket - $20
metal head gasket - $40
GTiR OEM oil cooler - $30

GTiR sandwich plate (for running remote oil filter, fittings included) - $30
Earl's remote oil thermostat w/ fittings - SOLD
Remote oil filter relocation kit w/ hose fittings - $40

Greddy PRofec B spec II with remote switching system
Includes all plugs and required wires, air fittings, Greedy 3-port boost control solenoid (with mounting base), dash unit, remote switching receiver and remote switch.
Condition: Good
Location: Rowville, VIC
Price: $260. SOLD

IMAG0506_zpsjcpw6iev.jpg


Greddy Turbo Timer
Includes plugs and wiring.
Condition: Good
Location: Rowville, VIC
Price: $40 SOLD

Bee*R rev limiter
Condition: Good
Location: Rowville, VIC
Price: $180. SOLD

  • 2 weeks later...
  • 3 weeks later...

Added brand new belts and misc. pulsar bits.PM me for details and pics. postage can be organised.

  • 3 weeks later...

Z32 AFM - mesh removed SOLD
Z32 AFM mounted in a 3" aluminum pipe (10" long) made by Ace Dyno + Workshop. Works fine. $140

IMAG0621_zpsr7l55uur.jpg

IMAG0622_zpsg8fw2sgy.jpg

IMAG0623_zpsdpkt8h4j.jpg

IMAG0624_zps72ogmzm6.jpg

IMAG0625_zpslrbhuer0.jpg

IMAG0626_zpsbqea0o36.jpg

Rocker cover gasket (used) + spark plug O-rings (new) - $30
Valve steam seals (exhaust & intake, new) - $40
Intake gaskets (from GTiR, might fit others) - $20 each
2x graphite exhaust gaskets - $10 each
Various turbo gaskets - $10 each for metal, $5 each for others
Graphite head gasket - $20
metal head gasket - $40
GTiR OEM oil cooler - $30

GTiR sandwich plate (for running remote oil filter, fittings included) - $30
Earl's remote oil thermostat w/ fittings - SOLD

Remote oil filter block - $40

Apexi air filter (used, but cleaner than every other ive seen fitted, bolts included) - $40
^ +$5 for gasket or mounting bracket thing.
Ignition module (not sure if GTiR or SSS) - $15
Distributor cap (probably done 2000kms, very little arcing on the contacts) - $50
Distributor rotor and gasket-thing - $15
NGK blue ignition leads (used) - $25
Crane cams LX91 ignition coil (w/ required plug) - SOLD
Walbro 255 in-tank fuel pump (used, works fine includes new sock) - $70

IMAG0627_zpsvhowwzvi.jpg

IMAG0594_zpsgyup07mz.jpg

IMAG0615_zpsen2jib7w.jpg

IMAG0616_zpsuf3w2sgo.jpg

IMAG0515_zpsdvbxa0bb.jpg

  • 2 weeks later...
  • 2 weeks later...

Pretty sure it won't. I don't know the GTiR oil filter thread size so not sure about the sandwich plate. Relocation block is available though (M20 filter thread. -8AN fittings included)

You're welcome to the oil thermostat as well

looking at some pics, it might work. not sure how orientation will compare, but see how you go.

I'll stand out the front of my house on tuesday and wednesday and wait for you to drive past.

RB25:

2mpd93a.jpg

wanli1.jpg

GTiR:

engineblock.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...