Jump to content
SAU Community

Recommended Posts

Yes thats good information i can do that what else

instead of using a whole lot of useless and redundant wiring, a lot of people are running one wire from the engine and into the cabbin while T-ing off for a/c, fuel pump, headlights etc. Some people have reported saving over 20kg in weight. Not sure why nissan didn't do this originally.

  • Like 1

Also i noticed you said you aren't allowed an intercooler? Easy fix so you can still run more boost is to, put an enclosed pod filter in between the throttle body and turbo pipe. It act's as an intercooler, and because it's fully enclosed it's completely legal.

  • Like 1

instead of using a whole lot of useless and redundant wiring, a lot of people are running one wire from the engine and into the cabbin while T-ing off for a/c, fuel pump, headlights etc. Some people have reported saving over 20kg in weight. Not sure why nissan didn't do this originally.

Yea i have something like that planed for down the road

Also i noticed you said you aren't allowed an intercooler? Easy fix so you can still run more boost is to, put an enclosed pod filter in between the throttle body and turbo pipe. It act's as an intercooler, and because it's fully 5enclosed it's completely legal.

hahhaha we got a funny guy

Did you only quote the first half of my response because you did not understand the second part?

I'd get a wrecked 34 for like cheapz cut out the rails and weld them in at right angles to the current rails. If you have enough I would put a diagonal in aswell. Ultimate chassis strength for over 1000hp which is what you are going for yeh?

If i do engine an drivetrain first then im were i am now if i do suspension brakes an chassis now then all thats left is power make some sort of sense. What i need know is what do i need to to make a super strong car so i can slap a massive motor in an not have any troubles... pretty much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...