Jump to content
SAU Community

Recommended Posts

Yes thats good information i can do that what else

instead of using a whole lot of useless and redundant wiring, a lot of people are running one wire from the engine and into the cabbin while T-ing off for a/c, fuel pump, headlights etc. Some people have reported saving over 20kg in weight. Not sure why nissan didn't do this originally.

  • Like 1

Also i noticed you said you aren't allowed an intercooler? Easy fix so you can still run more boost is to, put an enclosed pod filter in between the throttle body and turbo pipe. It act's as an intercooler, and because it's fully enclosed it's completely legal.

  • Like 1

instead of using a whole lot of useless and redundant wiring, a lot of people are running one wire from the engine and into the cabbin while T-ing off for a/c, fuel pump, headlights etc. Some people have reported saving over 20kg in weight. Not sure why nissan didn't do this originally.

Yea i have something like that planed for down the road

Also i noticed you said you aren't allowed an intercooler? Easy fix so you can still run more boost is to, put an enclosed pod filter in between the throttle body and turbo pipe. It act's as an intercooler, and because it's fully 5enclosed it's completely legal.

hahhaha we got a funny guy

Did you only quote the first half of my response because you did not understand the second part?

I'd get a wrecked 34 for like cheapz cut out the rails and weld them in at right angles to the current rails. If you have enough I would put a diagonal in aswell. Ultimate chassis strength for over 1000hp which is what you are going for yeh?

If i do engine an drivetrain first then im were i am now if i do suspension brakes an chassis now then all thats left is power make some sort of sense. What i need know is what do i need to to make a super strong car so i can slap a massive motor in an not have any troubles... pretty much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The frontend wouldn't go low enough because the coilover was max low and the upper control arm would collapse into itself and potentially bottom out in the strut tower. I made a brace and cut off the kingpin and then moved the upright down 1.25" and welded. i still have to finish but this gives an idea. Now I can have a normal 3.25" of shock travel and things aren't binding. I'm also dropping the lower arm and tie rod 1.25".
    • Motor and body mockup. Wheel fitment and ride height not set. Last pic shows front ride height after modifying the front uprights to make a 1.25" drop spindle.
    • Here's Logans Silvia with R32 Drivetrain, mine will be slightly lower (more angle). He was constantly blowing the RH axles at around 16deg. I want to avoid this.    
    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
×
×
  • Create New...