Jump to content
SAU Community

Recommended Posts

I was under the impression that bonnet pins/locks were ok so long as the standard lock was still in use. Effectively twice the safety and a bit of overkill.

Maybe they are concerned with pedestrians getting caught on them whilst flying over your bonnet. Who knows....?

Z.

I believe that is the reason for them being illegal

True.

Personally i dont think you should be complaining about the pins, your VERY lucky they didnt **** you up for having a carbon fibre bonnet. as that would be alot more espensive to replace then some bonnet pins.

out of intereset.. why do you have bonnet pins on your road car?

not havign ago .. im just confused as to why? :P

True.

Personally i dont think you should be complaining about the pins, your VERY lucky they didnt **** you up for having a carbon fibre bonnet. as that would be alot more espensive to replace then some bonnet pins.

out of intereset.. why do you have bonnet pins on your road car?

not havign ago .. im just confused as to why? :)

At this time my road car is also my race car and bonnet pins are mandatory for some of the events I enter. Also I would be uneasy about a fibreglass bonnet with only one lock in the centre. I was actually considering adding 2 more evenly spaced as in the V8's I'm sure they'r there for a reason.

Hope that unconfuses you :cheers:

On the topic of carbon and FRP bonnets, having one on a road car is a bit of a wank. Firstly as you all know they are illegal and 2) only if they have vents.

Have you ever see the f**ker flex so much, ballooning as much as 1-1.5 inches during a high speed rally stage...without vents your likely to crack your FRP bonnet and if your lucky you'll still get heaps of scratches around the bonnet pins where they have been vibrating away.

Your better off with a Aluminium bonnet on a road car.

I used to get pulled over (no joke) atleast once every 3 weeks in a car that had bonnet pins.

Noone ever even mentioned them.

I was going to get bonnet pins on my r32 - I will have to clarify this because I don't think they are illegal if you have your factory catch in place.

And as for them being a wank - it's easier for racing/track where extra restraints are required instead of a peice of rope or whatever else people use.

Maybe I never got defected because the car I had some came stock with bonnet pins.. HMM interesting.

I find it a bit strange for something that's illegal on a car would be sold at super cheap auto to put on your car.

Even if it does look like rice.

Ummmm there are lots of things sold at autobarn/supercheap that are illegal/defectable, just because they sell them, doesn't make them legal to use on a road car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
×
×
  • Create New...