Jump to content
SAU Community

Recommended Posts

Hi all first time poster,

i have a 2002 m35 stagea car broke down the other night and when called the raa they said fuel issues most prob fuel pump took to mechanic who ran some tests and thought same prob so swapped the fuel pump but car still doing the exact same thing will idle fine but for some reason when you give it throttle is does nothing besides try and die the mechanic said for some reason the pump is only getting 1/4 of the voltage it should be and the injectors are dumping three times as much fuel as they should be, he has no idea why has been troubleshooting for a week now, any one else with this issue and how they fixed it ?

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/
Share on other sites

How did he establish fuel pump? Did he put a pressure gauge on it?

Also, 3 times the fuel is a weird statement, and unmeasurable. Time to take it somewhere who knows what they are doing.

+1, take it to someone who knows the car..

Both my mechanics have never seen a VQ25DET before.. and it's 14 years old

Don't rush into process of elimination.

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7604940
Share on other sites

Fuel pump runs lower voltage at idle to reduce noise and heat.

Symptoms sound like the Air Flow Meter could be stuffed. Unplug it and restart your car a couple of time so the ecu knows its unplugged and will enter limp home mode(won't allow revs much over 2,000rpm which is normal). If it then idles smoother the AFM sensor may need replacing. I replaced mine with a genuine Nissan item after my Chinese sensor lasted 4 days but others say the Chinese copies are more reliable. Maybe talk to scotty about which one he has had good reliability with. I'm sure he will chime in soon.

*a loose intercooler pipe or charge system leak will also give the similar symptoms as a blown AFM. So check them before buying a new sensor if limp home mode works.

Matt

Edited by BoostdR
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7604976
Share on other sites

It's ferked, and the ecu has no way of telling it's ferked.

Scanners don't tell you the fault, they only tell you what the ECU thinks the fault might be, perhaps.

Edit, does it run the same if you unplug the AFM?

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7605202
Share on other sites

Does it drive the same in AFM limp mode?

If it idles fine, then it obviously isn't the fuel pump, slap a known good AFM element in there and try it out, it's the only way to rule the AFM from the equation. The AFM's rarely fail where the ECU actually throws a code in my experience, and I have changed literally hundreds of them.

Once it's sorted, get a new mechanic. I suspect he just wasted your time and money changing a perfectly good pump. Do you know what pump he put in there? it might need to be re-wired if it's an aftermarket Walbro or similar. They don't like that low voltage at idle/cruise (that all cars do these days.)

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7605210
Share on other sites

The pump he put in was a walbro pump yes, the mechanic has only ever dealt with upgrading parts on m35 stageas before so it all one big learning process unfortunately he never had one with this problem before like most mechanics I've spoken to before him

Link to comment
https://www.sau.com.au/forums/topic/459758-m35-with-issues/#findComment-7605223
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...