Jump to content
SAU Community

Recommended Posts

Hello Group,

I have a 1996 R33 GTST with an RB25DET and manual gearbox. I'm looking into taking this car back with me to USA. It is on the allowable import list for USA, but I'm looking for any other information you guys can help me with. USA says that one must used a Registered Importer (and those ppl want about $12k USD) to bring the car in, but is there a way around it? Does the car have to be completely stock? What works do they want performed on the car? Any ideas or information would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/460269-exporting-an-r33-gtst-to-usa/
Share on other sites

Unfortunately the R33 is only "technically" legal to bring into the US. The regulation you're referring to is VCP-32 from the DOT which allows R33 GT-Rs or GTSs made between January 1996 and 1998 to come in but only if the necessary modifications are made to comply with BOTH DOT and EPA standards. The required mods were originally protected trade secrets but the portion to comply with DOT standards was eventually released however the required emissions mods - namely an OBD II retrofit - are only known to the original RI that developed the system, JK Technologies. So basically unless you can convince JK Technologies to do it for you which they are not interested in currently from what I've been told you can't bring in an R33 even if it is technically possible.

If you want to read more I explained this in more detail in my write-up on the Motorex story that prompted the DOT's current dislike of imported Skylines:

http://23gt.blogspot.com/2015/09/godzilla-versus-banhammer-sad-tale-of.html

If you want to read VCP-32, it's here:

http://www.nhtsa.gov/cars/rules/import/FAQ%20Site/pages/page10.html

If you want the info on required mods for the DOT part they're listed here but like I said, they're not much good unless you can get past the EPA part too. EPA does allow exemptions for cars over 21 years old so you can possibly import the car in 2017 but you'd still have to do the mods listed here and get past any regulations for the state you plan to register it in. To begin with you'll need to have an intact drivers side airbag because that was the key requirement that made the DOT consider the 1996-1998 cars still eligible:

http://www.nicoclub.com/articles/NHTSA-update.pdf

Oh, I forgot the most important thing - are you a US citizen? If yes then the above applies to you, If not then the below document applies to you. Simply put, if you're a foreigner legally allowed into the US you can import a personal use vehicle for up to one year at the time of your entry into the US but then you have to export it again after that year if it doesn't meet the relevant US DOT and EPA regulations (the ones I mentioned above).

http://www.cbp.gov/trade/basic-import-export/importing-car

There are no work arounds to these regulations - this is Federal law. If anyone tells you otherwise they're probably trying to scam you or don't know what they're talking about.

Thanks for the info GSX; I will read it all later tonight (Bathurst 1000 is on today!). I am an American citizen trying to bring the car in. Shouldn't there be a law allowing the Owner to repair the car to Standard themselves and then have it inspected?

Thanks for the info GSX; I will read it all later tonight (Bathurst 1000 is on today!). I am an American citizen trying to bring the car in. Shouldn't there be a law allowing the Owner to repair the car to Standard themselves and then have it inspected?

The only way to get the car certified is through an RI. You could theoretically do the modification work yourself but you'd still need an RI who's willing to check out the car, file a claim with the Feds, and affix a certification label to it. Most RI's probably won't agree to someone else doing the mods because they could lose their license as an RI if the DOT finds out they certified a car that's improperly modded and Skylines get extra scrutiny from them because of the Motorex fiasco.

You see in the case of an imported car like this the RI is basically functioning like a car manufacturer. They're making sure the car is up to standards, affixing a federally-required label identifying it as such, and submitting the data package that details how the car was made to comply - and an individual data package has to be done for each car they certify, it's not a group submission. The Feds don't have an "inspection program" where a private citizen can take a car they've modified themselves that's why there's a lot of money and paperwork involved with becoming an RI - you're basically acting as a car manufacturer, only on a smaller scale.

Unfortunately the situation is far from simple and cheap. If it were, there would already be several RI's bringing in R33s currently because of the sheer demand for Skylines in the US but instead there are zero legit ones currently because of all the problems involved. Unless you have a lot of money and determination to see this through I wouldn't even bother because in the worst case your car could be seized by the DOT and exported or even crushed. Either way you'll never see it again after all the expense of bringing it over. If you really want to bring it here your best bet is to wait until 2021 when it fits under both DOT and EPA exemptions (you may still face some hurdles though since emissions laws may change and state laws are also a consideration).

Here's a good read if you want to know what's been happening to improperly imported Skylines - it also explains the same stuff I mentioned about the correct importation process:

http://www.nicoclub.com/archives/breaking-news-us-government-turns-up-heat-on-skyline-owners.html

So I've done some of the reading above, and now my head is hurting! So it seems that the car will pass the DOT stuff, but nobody wants to deal wit the OBD2 stuff? I have sent JKT an email this morning (it's the weekend in USA) asking if they would be interested in taking on this car; but after reading all the stuff it seems like they will likely shy away. With them being the only ones 'able' to do it, but not willing to, shouldn't the Gov't issue a waiver for these vehicles? There is a thing against a monopoly, but they likely don't car about it on such a small scale; however if there isn't such a system available I would think that a waiver would be available. One would think that if I took it to a referee station (do they even exist anymore?) every year to ensure the car is running clean, there wouldn't be an issue. Anyway, there is more reading and studying to do on the subject, but my timing is limited as I was hoping to import it within the next 6 months. Any further suggestions?

So I've done some of the reading above, and now my head is hurting! So it seems that the car will pass the DOT stuff, but nobody wants to deal wit the OBD2 stuff? I have sent JKT an email this morning (it's the weekend in USA) asking if they would be interested in taking on this car; but after reading all the stuff it seems like they will likely shy away. With them being the only ones 'able' to do it, but not willing to, shouldn't the Gov't issue a waiver for these vehicles? There is a thing against a monopoly, but they likely don't car about it on such a small scale; however if there isn't such a system available I would think that a waiver would be available. One would think that if I took it to a referee station (do they even exist anymore?) every year to ensure the car is running clean, there wouldn't be an issue. Anyway, there is more reading and studying to do on the subject, but my timing is limited as I was hoping to import it within the next 6 months. Any further suggestions?

Although the Feds make silly decisions sometimes there's no issue with monopoly here - performance cars aren't an essential need and there are many other avenues to get one besides importing an example that was never sold in the country legally. They aren't under any obligation to make the import process easier. Look at it logically, the manufacturer never saw the need to make the car meet US requirements and sell it here so why does it behoove the US government to go out of its way to let it in? As far as they're concerned there IS a waiver process in place - either wait the requisite 25 year limit or pay the money to go through the process to bring it in before then.

You can't reasonably expect the US government to force JK Technologies to release the trade secrets they acquired with their own money when it's for the sake of someone's wants and not for an essential need. Owning a Skyline is not a "need" or an "inalienable right" - it's a privilege. Anyone is free to replicate what JK did, they just have to be willing to spend the money and time to duplicate it.

And the "referee station" you talk of is for the state's requirements, not Federal. The Feds have their own requirements for legality, the individual states have theirs - you have to meet both. It's not a case of one or the other.

Unfortunately the situation is at it is. I don't agree with the 25 year limit myself and I think 15 years is more reasonable like in Canada but the law is the law. We can work to change it but until it does, we need to abide by it.

This news just broke today but if you have the money someone was able to get JK Technologies to do the OBD II conversion and bring in an R33 LM:

https://www.facebook.com/rivsuimports/photos/a.1407597889470839.1073741829.1387835771447051/1714179538812671/?type=3

Rumor has it that the process cost $35K though so it's not exactly a cheap option.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...