Jump to content
SAU Community

Recommended Posts

gohan does mean 'rice', but it also has a 'meal' connotation. It also specifically means 'boiled rice'. Gohan is two kanji too, though the first kanji (written as hiragana above) isn't what I'd consider to be basic kanji.

the first thing that popped into my head when I read the OP, was kome

I'll go see if I can google up an image

Link to comment
https://www.sau.com.au/forums/topic/46046-jap-char-for-rice/#findComment-936017
Share on other sites

that one worked better :D

should be phonetically read as koh-meh

below it are various readings for it: kunyomi - japanese derived readings, and the onyomi - chinese derived readings (different readings are used for different kanji combinations, etc).

kome can be used for rice that you are eating, the sack of rice you are buying at the supermarket, or the rice growing in the field. It often has the honorific 'o' attached to it (ie: okome).

The correct way to write it is

1. short top left stroke

2. short top right stroke

3. horizontal stroke

4. vertical stroke

5. long bottom left stroke

6. long bottom right stroke

What I find ironic about this kanji - is that it is also the kanji for 'america' ...america is katakana-ized as 'amerika', but the kanji-fied version is 'beikoku' = the kanji above + 'nation' kanji (koku/kuni). I've been told it has to do with the sound of the kanji - nothing to do with the concept of 'rice country' - but I'm strongly of the belief that 'rice' (in car terms), is an american phenomenon, and just something the japanese copy and get blamed for (I'm sure some of the other sau japan locals will agree).

Link to comment
https://www.sau.com.au/forums/topic/46046-jap-char-for-rice/#findComment-936049
Share on other sites

owned: on paper, performance-wise, the JDM version I-III FDs (mine is a II) are pretty much on par with an r32 GTR (0-100 and 400m are very close). Though they are world's apart to drive - obviously rwd for a start - far less driver assistance ('pure sports' is the term often bandied about), very light (mine is 1260kg, some are a touch lighter), 50:50 weight. I love hammering a high-powered 4wd turbo around in the wet - but on a dry track - it doesn't come close to the adrenalin rush of the twin turbo rotary... which never seems to run out of power and just loves screaming high revs - combine that with arguably the best rwd chassis to ever come out of japan...

Power delivery is quite different, the lack of torque w/ rotary is one criticism that has been made - but when you are going 0-100 in under 5 seconds - I have to say "ahh... who cares, goodbye!". I do prefer to drive the ej20t powered forester around in traffic though (it's a more liveable beast in most ways).

Link to comment
https://www.sau.com.au/forums/topic/46046-jap-char-for-rice/#findComment-936070
Share on other sites

ご飯 - gohan
Jeez Merli, you flunked Japanese 1.01 didn't ya? :P

Gohan - cooked rice

Kome - 米 - rice (uncooked, like in a bag)

Edit: Holy shit... I was a bit late in replying wasn't I? Whadda tool! :Oops:

Link to comment
https://www.sau.com.au/forums/topic/46046-jap-char-for-rice/#findComment-936195
Share on other sites

btw, have fun with the new ride :rofl: where's the thread??
Mada mada... ;)

Actually, the car hasn't been signed over to me yet, and theres still some things to fix up on it (right Troy?) before I pick it up... I'll have a thread up at the beginning of August. We'll be heading over to the Pokka 1000km Taikyu race in August in convoy too, should be good.

Link to comment
https://www.sau.com.au/forums/topic/46046-jap-char-for-rice/#findComment-936668
Share on other sites

Jeez Merli, you flunked Japanese 1.01 didn't ya? ;)

Gohan - cooked rice

Kome - 米 - rice (uncooked, like in a bag)

Edit: Holy shit... I was a bit late in replying wasn't I? Whadda tool! :Oops:

It's been a while since I've had to speak japanese :)

And I don't think I ever learn't the word for "uncooked rice in a bag" :rofl:fawk.gif

Link to comment
https://www.sau.com.au/forums/topic/46046-jap-char-for-rice/#findComment-936788
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making Vag coil loom for rb25det, can anyone confirm the wire guage i’m using for power supply in diagram is enough for supply not too small for loom? For earth do i need to follow the same procedure or i can use only 16awg wire for all coil and their connecting wire following to the plug?
    • Did you panel beat the dents or have you tried to repair this only using filler?  Is your sanding block soft/flexible and is following the shape of the panel rather then just knocking down the high points? 
    • I haven't knocked them down yet. I think I made the repair more complex than it should have been. I had rock chips combined with waviness and dents and I tackled it all in one because it was near each other and just end up wasting a bunch of bog lol. I'll knock down those areas and see how I go. And yep what you are saying at the end is correct. I think I might be sanding the top of a steep hill then my sanding block falls into the dent and gets rid of the guidecoat if that makes sense. Though shouldnt unless I'm covering too big of an area with not a long enough block. I'll try something new and provide some updates. Getting there though! Thanks as always.  
    • Yeah makes sense, hard to comment on your situation without seeing what your doing. I was talking generally before, I would not be looking to randomly create low spots with a hammer to then have to fill them.  It's hard without seeing what your doing, it sounds like you are using the guide coat to identify low spots, as you're saying the panel is still wavy. I don't see how you're not ending up with patches of guide coat remaining in a wavy panel? Once the high spots are knocked down to the correct level, surely to have a wavy panel you need low spots. And those low spots would have guide coat still in them?
    • So I'll put filler past the repair area a bit to make sure I don't miss anything. Then I'll block it until it's almost level, put the guidecoat, then keep blocking until it's gone. Then it's still wavy.  In regards to hitting the panel, I saw this video might give more context - Skip to 0:47 he knocks it down. But yeah I'm sanding until the guidecoat is gone then checking because otherwise my filler is still well above the bodyline. Unless what you're saying is I should put guidecoat around it early, surrounding the filler then stip once it's gone?
×
×
  • Create New...