Jump to content
SAU Community

Recommended Posts

None of the climate control buttons (temp up/down, mode, fan, etc) light up when I turn the lights on (a couple of the gauges also don't light, but those globes are easier to find). I am assuming the bulbs are burned out because everything else functions, but being in the US even the Nissan dealer can't tell me what the proper globe part number is to buy replacements.They gave me the part number from a 90 300zx, but it would be a special order without any proof they will be the right size.

If someone can tell me the proper part number for the globes, or possibly a suggestion of what else might cause them all to fail at once I would appreciate it. The part number the dealer gave me was 27613-01p10. A google search only lists the 300zx as a fit for that part number, which makes me question if it will work in a Skyline. Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/461548-r32-gtr-climate-control-globes/
Share on other sites

well here is the fast diagram, the bulb part number for my VIN is 28529-05U00.

climate-bulbs.jpg

Having said that, it seems unlikely they have all gone at once for no other reason. I've not had that unit in the car for a while but I assume the lights are meant to come on when the headlights do?

If so, which other lights do or don't light up when the headlights do? Dash? Radio? Other dash buttons? It seems more likely a fuse is blown or there is a wiring issue.

I don't have it handy at the moment, but from memory the dash/switch lights come from the taillight fuse because they come on at the same time. From there, there are about a billion joins in the loom and one of those may have failed. They also join through either a pink or green common joiner near the fuse box so something may be missing there as well. either way, you could probably tap into something like the dash's lights and run a wire to the climate control unit if that is the issue.

They're called a T3.

I went to LED's, colour choices and brighter illumination, easily sourced on the net.

Cheap, usually come in a set of 6 so you'll have a few left over.

I went for blue colour thinking it would match the original but no they're too dull.

In Aus we have a forum member who sells all sizes of LEDs but I guess you'd find a source closer to home.

post-73571-0-13413600-1449607037_thumb.jpg

post-73571-0-88008900-1449607054_thumb.jpg

  • Like 2

Thanks for all the replies. Turns out a 92 Subaru SVX uses the same bulbs and my dad has one of those as a parts car. That will tide me over until I find better ones online.

As far as all of them going out at once, they have been dead since I bought the car so they very well could have died one at a time and the previous owner just never replaced them.

Edit: Just to add some additional info. All 6 bulbs really were bad. Also 1 of the 3 gauges in the middle cluster and about half the bulbs around the dash are also burned out. Also 1 from the primary gauge cluster. Apparently the previous owner didn't care about interior lights.

Edited by GoneGoose

One more question. The bulbs around the dashboard (headlight switch, rear defrost, etc) look similar to the T3s in the climate control, but with a much longer "neck". Any ideas what those are? I am not finding any T3s that match. Thanks again.

Here's what I'm gonna be using for my climate control lights.

https://www.superbrightleds.com/moreinfo/instrument-cluster-gauge/neox-led-bulb-high-power-instrument-panel-led/221/

And those long neck bulbs are 3mm bulbs. So here's what Imma buy. (Bulk sale but cheaper then buying separate )

http://www.topledlight.com/Wholesale-3mm-led-lights_c809

Just need to remove the old bulb and wire these the same way. Pretty simple. You will love going to LED over regular stock bulbs. So much brighter and cleaner looking.

P.S.

Forgot to add I'm in America so not sure what shipping might be for you or what you may have that's closer lol

Edited by B-Turbo
  • 1 year later...
  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...