Jump to content
SAU Community

Recommended Posts

Hello, recently my passenger door has had trouble locking. I could occasionally get it to lock by trying a few times or really forcing on the manual lock switch or something, but it's gotten worse. The central locking makes a bit of a buzzing/grinding sound as if it is getting stuck. So I decided to take it apart and after playing with it some, gave up and bought a used mechanism, which includes the mechanical half and the electronic half.

After playing with the new (used) part, it's doing the exact same thing. In messing with it, I plugged in only the electronic portion with the mechanical half disconnected. The arm looks to swing the whole length without any trouble when locking the driver door and triggering the auto lock. However, when I add the mechanical portion, both the new and old one, it gets stuck before it fully locks.

In just playing with the mechanical portion, I can get it to lock fine using the rod lever, but you have to push it a bit to get it to fully lock (it hits a point where it gets a little tight and then clicks to lock position), so I can kind of understand why the motor can't get it to lock all of the way. I find it a little strange that two parts are both having the same mechanical issue though. The part where it clicks into lock position looks to have an arm that rubs up against the arm for the door handle and latch release, when I look inside the mechanism as best I can. So if you slightly pull the release lever while turning the lock lever, it doesn't hit the rough click point really. I was thinking of trying to find a way to adjust the two arms so they aren't hitting one another so that it is easier for it to get past the lock 'click'. However I don't see an easy way to do so or a way to really take the whole thing apart without breaking it. Maybe I can force some slight tension on the release lever to keep it's arm from rubbing on the lock arm. I'm sure this isn't making a lot of sense without pictures though if you haven't looked into it prior.

Anyway, I'm wondering if anyone has had any experience taking the lock/latch mechanism apart or adjusting theirs due to similar issues. I searched a good bit and while this seems not too uncommon, most people say they just bought a new part and moved on. I tried to do that but have the same issue, so I'm thinking there has to be a way to fix this since it seems to be the mechanical portion. Any help or thoughts are appreciated.

Link to comment
https://www.sau.com.au/forums/topic/461819-r32-door-latch-mechanism/
Share on other sites

funnily enough, I just finished cleaning out the boot lock on my 32 since the key wasn't working most of the time. Once the barrel was out it was clearly hard to turn with the key.

Basically I cleaned the barrel thoroughly with brake cleaner, turning the key to work the tumblers around. Once it dried out I lubed it with some graphite powder, it works perfectly now.

I'm not clear on what you mean by mechanical part, but if it includes the lock barrel give that a go. For the rest of the components I just cleaned them out with brake cleaner and then used lithium grease on the moving parts, although I'm sure regular grease would have been fine.

Do you have a pic of where exactly you think the problem is?

BTW I wouldn't discount that the second hard part is also just dirty...it's the same age afterall...

funnily enough, I just finished cleaning out the boot lock on my 32 since the key wasn't working most of the time. Once the barrel was out it was clearly hard to turn with the key.

Basically I cleaned the barrel thoroughly with brake cleaner, turning the key to work the tumblers around. Once it dried out I lubed it with some graphite powder, it works perfectly now.

I'm not clear on what you mean by mechanical part, but if it includes the lock barrel give that a go. For the rest of the components I just cleaned them out with brake cleaner and then used lithium grease on the moving parts, although I'm sure regular grease would have been fine.

Do you have a pic of where exactly you think the problem is?

BTW I wouldn't discount that the second hard part is also just dirty...it's the same age afterall...

Thanks for the reply, I'll try and get some pictures tonight (US time). It's not the actual lock barrel, but the latch portion of the door which is separate (the lock barrel connects to the latch portion with a rod). I sprayed my original and the second hand part down pretty good with brake clean and then pb blaster last night and it definitely did loosen it up some but maybe not enough still. Both the original and second hand are functioning the exact same though which leads me to believe something is just off or can be adjusted, just not sure what. I'll try and grease it up good and get some pictures too.

No pics because I've got the latch back on the door for now. I greased it up pretty good and still didn't have any luck but am able to get the mech to lock fine now using the door latch on the inside. I found that the angle of the rod that connects to the door mech/lock arm affects how smooth or rough it locks. I was able to get it at an angle in which it will now lock and unlock fine from the inside (something it wouldn't even do before). It still seems to get jammed up though when using the key or the electronic central locks, in which it hits the point before the 'click' and then just buzzes/grinds. I'm not really sure what else can be done without breaking one open and trying to figure out some more what's going on in it. For now, I think I'll cut my losses and settle for just manually locking/unlocking from the inside and just unplug the electronic lock and disconnect the key barrel rod.

I'll play around with it a little more tomorrow but if nothing new arises, I'll live with it for now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...