Jump to content
SAU Community

Recommended Posts

Hi guys is there a write up on how to remove the standard head unit in an M35? I've done searches but can't find anything. I've found some V35 write ups/videos but they don't seem right with the M35. They say to remove the silver panel where the clock is in a V and where the time and A/C display is in an M then remove the panel under the steering wheel and undo a couple of screws. Is this right for a Stagea? It doesn't seem right to me but hey I'm probably wrong.

Thanks and merry Christmas

Link to comment
https://www.sau.com.au/forums/topic/461861-m35-head-unit-installremoval/
Share on other sites

Glove box out, panel under steering wheel out, clock panel out, gear knob off, center console out, the two panels with pockets on either side of center console out.. i used the v35 youtube vid for guidance and got it pretty quick

Edited by stripey

Just something I had trouble with, double check your harness before plugging it

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I blew up the fuse by doing so with the harness I got.

Also, not sure if you got a metra kit for the double din conversion but make sure you have the air con control board as the oem one is most certainly just one big board shared with the stereo.

Had to take everything apart after I got one to install it and that's not something you want to do 3 times like I had to ;)

Just something I had trouble with, double check your harness before plugging it

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I blew up the fuse by doing so with the harness I got.

Also, not sure if you got a metra kit for the double din conversion but make sure you have the air con control board as the oem one is most certainly just one big board shared with the stereo.

Had to take everything apart after I got one to install it and that's not something you want to do 3 times like I had to ;)

I'm not going double din, staying single din. Isn't the aircon separate to the stereo? I've only got a normal single din with gauges on top then I think aircon on top of that...

Got the head deck out and can see what you mean now. They should sell these at autobarn shouldn't they?

Also, what's outlined in the pic below I assume is the aux in? Does autobarn or similar sell an adapter to change what used to plug into that to a 3.5mm head phone jack for the aux in on new head deck?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...